| Official Luthiers Forum! http://w-ww.luthiersforum.com/forum/ |
|
| 16/32 paper sliding http://w-ww.luthiersforum.com/forum/viewtopic.php?f=10101&t=55347 |
Page 1 of 1 |
| Author: | wbergman [ Sat Nov 12, 2022 10:58 am ] |
| Post subject: | 16/32 paper sliding |
I Have persistent trouble with the sandpaper sliding on the drum and overlapping. I use Jet brand paper. Any suggestions? |
|
| Author: | runamuck [ Fri Nov 18, 2022 1:59 pm ] |
| Post subject: | Re: 16/32 paper sliding |
wbergman wrote: I Have persistent trouble with the sandpaper sliding on the drum and overlapping. I use Jet brand paper. Any suggestions? Not that this is your problem, but I had that issue when I started winding the paper on from the wrong end of the drum. |
|
| Author: | wbergman [ Fri Nov 18, 2022 6:56 pm ] |
| Post subject: | Re: 16/32 paper sliding |
I am not sure what is the wrong end. I can only get a pliers in on the outboard end to try to pull the paper tight in the clamp. So, I start on the inboard end. |
|
| Page 1 of 1 | All times are UTC - 5 hours |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|