| Official Luthiers Forum! http://w-ww.luthiersforum.com/forum/ |
|
| OLF Roundtable - Episode 2 - Closeout http://w-ww.luthiersforum.com/forum/viewtopic.php?f=10101&t=55383 |
Page 1 of 1 |
| Author: | bcombs510 [ Sat Dec 03, 2022 8:06 pm ] |
| Post subject: | OLF Roundtable - Episode 2 - Closeout |
Thanks again to everyone who was able to join today's roundtable meeting. We had a few new members to join, so welcome Steve Smith, Andy Birko, Jay DeRocher & Darrel Frieson! Their intros are at the beginning of the recording and then we dove into jigs! I have to say I saw some really cool ideas that I'll certainly incorporate in my shop. The recording and attendance report is below. If you would like to submit anonymous feedback on topics, experience, etc... please fill out the form here - https://forms.office.com/r/HHEni87fAP Highlights: Intros: Steve Smith - 1:30 Andy Birko - 4:25 Jay DeRocher - 9:15 Darrel Friesen - 18:10 Jigs: Bob Gramann - 25:50 - Putting a radius on the bridge bottom using a belt sander Steve Smith - 30:45 - Jigs for sanding purfling, nuts, saddles, etc... using a belt sander & headstock shaping using a belt sander Don Parker - 34:25 - Scarf joint sled & scarf gluing jig James Lindley & Ryan - 41:10 - Joining plates with a table saw and glue line rip blade Andy Birko - 49:10 - Work holding using painters tape and CA glue Jay DeRocher - 58:40 - Dremel fret tang cutter Dave Rickard - 1:06:20 - Pipe clamp work holding Steve Sollod - 1:07:55 - Bridge drilling, neck centerline jig, radius block holder Darrel Friesen - 1:13:00 - Archtop Demo (what a cool hang out space!) Brad Combs - 1:17:05 - Brace joint and alignment jig Overtime!! James Lindley - 1:26:50 - Adjustable go-bars Darrel Friesen - 1:32:30 - Jim Byrnes mini table-saw Recording: Attendance report: Bob Gramann Steve Smith Don Parker James “Wud” Lindley Andy Birko Jay DeRocher Dave Rickard Steve Sollod Darrel Friesen Brad Combs Thanks to everyone who attended. Watch for the invite for next month. Thanks all! Brad |
|
| Author: | James Orr [ Sat Dec 03, 2022 8:52 pm ] |
| Post subject: | Re: OLF Roundtable - Episode 2 - Closeout |
I can't wait to dig in. So bummed not to make it today! Trish was in a ceramics workshop all day, and I was watching both of our little ones. |
|
| Author: | Darrel Friesen [ Sat Dec 03, 2022 9:35 pm ] |
| Post subject: | Re: OLF Roundtable - Episode 2 - Closeout |
Great meeting you guys. I see that my surface pro, walk around camera skills are lacking, ha! Looking forward to the next one and will be more prepared hopefully. I learned a few things for sure as always. |
|
| Author: | doncaparker [ Sun Dec 04, 2022 12:39 am ] |
| Post subject: | Re: OLF Roundtable - Episode 2 - Closeout |
Thanks again for hosting, Brad! Sorry I had to run off. I’ll watch the recording to catch up on the overtime content. I appreciate everyone sharing; I learned some useful things. |
|
| Author: | doncaparker [ Sun Dec 04, 2022 8:10 am ] |
| Post subject: | Re: OLF Roundtable - Episode 2 - Closeout |
Brad-- The recording link is not showing. I checked on both an iPad and a Windows laptop. Could you put another link in a post, like last time? Thanks! |
|
| Author: | Dave Rickard [ Sun Dec 04, 2022 8:10 am ] |
| Post subject: | Re: OLF Roundtable - Episode 2 - Closeout |
Lots of interesting ideas. Thanks to everyone for sharing and Brad for hosting. I need to apologize for logging in to the roundtable and not muting my mic while I was still watching the KSU TCU football game. Ya might say I was little excited about both. lets see if this link works. https://youtu.be/uvLJjLvudjU |
|
| Author: | SteveSmith [ Sun Dec 04, 2022 8:27 am ] |
| Post subject: | Re: OLF Roundtable - Episode 2 - Closeout |
I enjoyed talking to all of you and thanks for some good ideas! And, Brad, thank you for taking the time to put this together! |
|
| Author: | doncaparker [ Sun Dec 04, 2022 8:56 am ] |
| Post subject: | Re: OLF Roundtable - Episode 2 - Closeout |
Dave’s link works. Thanks! |
|
| Author: | bcombs510 [ Sun Dec 04, 2022 8:59 am ] |
| Post subject: | Re: OLF Roundtable - Episode 2 - Closeout |
Don, did the link that Dave shared work? Here is a direct link to the video - https://youtu.be/uvLJjLvudjU Sent from my iPhone using Tapatalk Pro |
|
| Author: | bcombs510 [ Sun Dec 04, 2022 9:00 am ] |
| Post subject: | Re: OLF Roundtable - Episode 2 - Closeout |
Ok, I see Dave’s link worked so I’ll start adding both a direct link and an embedded link in the posting. Sent from my iPhone using Tapatalk Pro |
|
| Author: | RNRoberts [ Mon Dec 05, 2022 8:43 am ] |
| Post subject: | Re: OLF Roundtable - Episode 2 - Closeout |
Brad, A big thank you for putting these together. It's really good to put a face (and a shop) to so many of you. I especially want to thank you for archiving these for those of us without the tech chops to attend. |
|
| Author: | Bryan Bear [ Mon Dec 05, 2022 9:07 am ] |
| Post subject: | Re: OLF Roundtable - Episode 2 - Closeout |
Watched it last night. thanks again for getting this together. |
|
| Author: | Durero [ Mon Dec 05, 2022 8:17 pm ] |
| Post subject: | Re: OLF Roundtable - Episode 2 - Closeout |
Thanks very much for coordinating these Brad! As usual I got some great new ideas from it. Thanks to Andy Birko for the CA & Masking tape demo. Like others commented in the video, I thought I understood the concept but I had totally missed out on the burnishing step! Great jigs and great shops! |
|
| Author: | mikeyb2 [ Wed Dec 07, 2022 5:45 pm ] |
| Post subject: | Re: OLF Roundtable - Episode 2 - Closeout |
Just watched this , so many thanks to Brad and everyone who contributed. All very interesting and a few things learned, but it was especially reassuring to know that I'm not the only one who drops things on the floor and prefers them to stay there. I also invested in one of those grabber stick gizmos. My stool is an important part of my shop now. Thanks again guys , I'm looking forward to the next one. |
|
| Page 1 of 1 | All times are UTC - 5 hours |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|