purfling ledges larger than 0.210"

Board index » Luthiers Forum Rooms » Guitar Building Forum

All times are UTC - 5 hours

Forum rules

Be nice, no cussin and enjoy!

purfling ledges larger than 0.210"

Page 1 of 1

[ 1 post ]

Print view

Previous topic | Next topic

Author

Message

flemsmith

Post subject: purfling ledges larger than 0.210"

Posted: Fri Jan 20, 2023 3:33 pm

Cocobolo

Joined: Thu Feb 15, 2018 11:06 am
Posts: 274
First name: Roy L
Last Name: Smith
City: Apache Junction
State: Az
Zip/Postal Code: 85119
Country: USA
Focus: Repair
Status: Amateur

What is a good way to rout purfling ledge a bit larger than I can get with the StewMac bearings? (0.210"). Bought a rabetting kit hoping to use one of those bearings to get to something close to 0.225". Turns out the rabetting bearings I bought use a smaller ID bearing than Stew Mac's 1/4". Appreciate any advice. Thanks. Roy

Top

Page 1 of 1

[ 1 post ]

Board index » Luthiers Forum Rooms » Guitar Building Forum

All times are UTC - 5 hours

Who is online

Users browsing this forum: No registered users and 31 guests

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Jump to:

Official Luthiers Forum!

Forum rules

purfling ledges larger than 0.210"

Who is online