| Official Luthiers Forum! http://w-ww.luthiersforum.com/forum/ |
|
| purfling ledges larger than 0.210" http://w-ww.luthiersforum.com/forum/viewtopic.php?f=10101&t=55465 |
Page 1 of 1 |
| Author: | flemsmith [ Fri Jan 20, 2023 3:33 pm ] |
| Post subject: | purfling ledges larger than 0.210" |
What is a good way to rout purfling ledge a bit larger than I can get with the StewMac bearings? (0.210"). Bought a rabetting kit hoping to use one of those bearings to get to something close to 0.225". Turns out the rabetting bearings I bought use a smaller ID bearing than Stew Mac's 1/4". Appreciate any advice. Thanks. Roy |
|
| Page 1 of 1 | All times are UTC - 5 hours |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|