CarlD wrote:
........Now if I could get the AquaCoat to fill the pores (I'm up to 10 coats so far) I'd get on to the finish.....
Yup, I haven't got the hang of it either.
| Official Luthiers Forum! http://w-ww.luthiersforum.com/forum/ |
|
| fumed white oak http://w-ww.luthiersforum.com/forum/viewtopic.php?f=10101&t=55691 |
Page 1 of 1 |
| Author: | phavriluk [ Sat May 27, 2023 12:59 pm ] |
| Post subject: | fumed white oak |
I think I want to use a set of white oak for my next project. I've seen mention of 'fuming' the oak in an ammonia atmosphere in order to darken it. Sounds like I might want to do that. Now what? I'd love some comments, advice, information, opinions.... Thanks! |
|
| Author: | Chris Pile [ Sat May 27, 2023 2:08 pm ] |
| Post subject: | Re: fumed white oak |
It does work. Or you can dilute the ammonia with water and use a rag. Keep in mind, this is mostly a technique furniture makers have employed. I've never done it, just read about it in Fine Woodworking. |
|
| Author: | kfish [ Sat May 27, 2023 2:14 pm ] |
| Post subject: | Re: fumed white oak |
Here's a previous discussion. http://luthiersforum.com/forum/viewtopic.php?f=10101&t=54854&hilit=fuming |
|
| Author: | phavriluk [ Sat May 27, 2023 2:31 pm ] |
| Post subject: | Re: fumed white oak |
Oops. I see my comments from 14 months ago in that thread, too. I dead forgot I'd asked about this before. Thanks! |
|
| Author: | CarlD [ Sun May 28, 2023 11:59 am ] |
| Post subject: | Re: fumed white oak |
I'm working on a white oak body that I fumed. Made a tent w/pvc pipe frame and clear poly over. Got some 28% ammonia @ Amazon (careful of the fumes!!) and left it in about a week. Came out a nice honey brown. Now if I could get the AquaCoat to fill the pores (I'm up to 10 coats so far) I'd get on to the finish..... |
|
| Author: | Colin North [ Sun May 28, 2023 2:36 pm ] |
| Post subject: | Re: fumed white oak |
CarlD wrote: ........Now if I could get the AquaCoat to fill the pores (I'm up to 10 coats so far) I'd get on to the finish..... Yup, I haven't got the hang of it either.
|
|
| Author: | Doc [ Sun May 28, 2023 4:01 pm ] |
| Post subject: | Re: fumed white oak |
I completed one a couple months back, too. Put the body in a clear plastic dry cleaning bag with some household ammonia for about 6 hours and checked it. Decided a few days later to do more so I left it in overnight. Did the trick and as mentioned a nice honey brown color. I used a couple coats of System 3 epoxy which worked nicely. |
|
| Author: | doncaparker [ Sun May 28, 2023 4:04 pm ] |
| Post subject: | Re: fumed white oak |
I haven’t fumed a guitar body yet, but I filled the pores in one recently that had QS white oak back and sides. The pore filling was a real challenge. I used Silver Tip. It eventually worked great, but it took a LOT of coats. |
|
| Author: | surveyor [ Sun May 28, 2023 4:59 pm ] |
| Post subject: | Re: fumed white oak |
I haven't "fumed" one yet, but might try that in the future. I did "ebonize" one using vinegar and old rusty nails, steel wool, etc. 
|
|
| Page 1 of 1 | All times are UTC - 5 hours |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|