| Official Luthiers Forum! http://w-ww.luthiersforum.com/forum/ |
|
| Home made dish http://w-ww.luthiersforum.com/forum/viewtopic.php?f=10101&t=55800 |
Page 1 of 1 |
| Author: | banjopicks [ Sat Jul 29, 2023 9:21 am ] |
| Post subject: | Home made dish |
A few years ago I made a 40' radius dish using a 1/4" and a 3/4" piece of MDF. I put a spacer in the center and ran it through the drum sander, took it apart a flipped the 1/4" piece and reinstalled it. It came out pretty good. Today I ran it through the drum sander to clean it up and I noticed there was hardly any dish left on the 1/4" side but the 3/4" side had a perfect radius. I'm totally baffled by this. Seems the 1/4" side is stronger or something. Any way, I'm going to put some fresh paper on it after I put some poly on it. |
|
| Page 1 of 1 | All times are UTC - 5 hours |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|