| Official Luthiers Forum! http://w-ww.luthiersforum.com/forum/ |
|
| SM Herringbone Rosette http://w-ww.luthiersforum.com/forum/viewtopic.php?f=10101&t=55816 |
Page 1 of 1 |
| Author: | banjopicks [ Sun Aug 06, 2023 9:49 am ] |
| Post subject: | SM Herringbone Rosette |
As I was preparing to layout this rosette, I needed a little more information than SM info gave. Being that my knee blew up for some unknown reason, I'm in bed and I came up with this drawing using FreeCAD. I hope it helps someone. Attachment: RosetteSmall.png
|
|
| Author: | Kbore [ Tue Aug 22, 2023 5:24 pm ] |
| Post subject: | Re: SM Herringbone Rosette |
I am actually going to use this soon, thanks! Ring widths: First rosette ring closest to center: .081" wide (2.221-2.140) Herringbone Ring: .300" wide Last rosette ring furthest from center .081" wide (2.875-2.794) Spruce land widths: First Spruce land from center hole: .1406" wide Second from center spruce land: .136" wide Last from center spruce land: .136" wide I need to get on the CAD train. |
|
| Page 1 of 1 | All times are UTC - 5 hours |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|