I forgot to mention, I'm going to have a good time steaming dents out of the top due to my careless approach when I was clamping the braces in. Will I ever learn.
![[headinwall]](./images/smilies/headbangwalluf8.gif "Mad")
| Official Luthiers Forum! http://w-ww.luthiersforum.com/forum/ |
|
| I'm on a roll! http://w-ww.luthiersforum.com/forum/viewtopic.php?f=10101&t=55899 |
Page 1 of 1 |
| Author: | banjopicks [ Thu Sep 14, 2023 8:07 am ] |
| Post subject: | I'm on a roll! |
Got an hour in the shop this morning, yay me. I still have some clean up to do on the braces, possibly more wood removal. I'm tapping and listening, I don't have a clue but it's fun anyway. I'd like to get to edge where people say if you go past it, there's no turning back. Maybe I'll wait til #3, I really want this to be a player at least. If I put a video of me bonking on it, would you be able to help me get that extra bit of goodness? I was thinking as I was carving, why not get most of this done off the guitar. I think I'll try that on #3. Especially the UTB, that was a bit of work. Attachment: BraceCarving.jpg
|
|
| Author: | banjopicks [ Thu Sep 14, 2023 8:21 am ] |
| Post subject: | Re: I'm on a roll! |
I forgot to mention, I'm going to have a good time steaming dents out of the top due to my careless approach when I was clamping the braces in. Will I ever learn.
|
|
| Author: | banjopicks [ Sat Sep 16, 2023 8:46 am ] |
| Post subject: | Re: I'm on a roll! |
Attachment: 20230916_092929.jpg Attachment: 20230916_092912.jpg Getting close to closing. Once I get the trains out, I'll set the go-bar deck up permanently. |
|
| Author: | Hesh [ Sat Sep 16, 2023 10:28 am ] |
| Post subject: | Re: I'm on a roll! |
banjopicks wrote: I forgot to mention, I'm going to have a good time steaming dents out of the top due to my careless approach when I was clamping the braces in. Will I ever learn. Hutch I wrote a tootorial for the OLF many years ago about steaming out dents in spruce tops. If you search it should be here. |
|
| Author: | Hesh [ Sat Sep 16, 2023 10:30 am ] |
| Post subject: | Re: I'm on a roll! |
Found it who that was a long time ago....  http://www.luthiersforum.com/forum/viewtopic.php?f=10117&t=20604&hilit=steaming+out+dents
|
|
| Author: | banjopicks [ Sat Sep 16, 2023 10:36 am ] |
| Post subject: | Re: I'm on a roll! |
Thanks, I'll give it a read. |
|
| Page 1 of 1 | All times are UTC - 5 hours |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|