| Official Luthiers Forum! http://w-ww.luthiersforum.com/forum/ |
|
| I learned the value of the paring chisel! http://w-ww.luthiersforum.com/forum/viewtopic.php?f=10101&t=55902 |
Page 1 of 1 |
| Author: | banjopicks [ Fri Sep 15, 2023 7:45 am ] |
| Post subject: | I learned the value of the paring chisel! |
I was having a little trouble pushing my chisel through the brace wood, mostly the UTB and I got to thinking about paring chisels which I don't own. I decided to turn one of my bench chisels into a paring chisel. It doesn't have the length but it's long enough. Anyway, I set my Veritas MKII to 20 degrees and and roughed it out on my belt sander and then went through my 400/ 1200 diamond stone followed by by 8000 ceramic and finished on the strop. I took it to the braces and just couldn't believe the difference 5 degrees made. It's like the wood was scared of it and I didn't need to do anything but guide it. It was a good morning. |
|
| Author: | Chris Pile [ Fri Sep 15, 2023 8:15 am ] |
| Post subject: | Re: I learned the value of the paring chisel! |
Those kinds of things are so satisfying. I love it when tools work. |
|
| Author: | Colin North [ Fri Sep 15, 2023 1:04 pm ] |
| Post subject: | Re: I learned the value of the paring chisel! |
I was surprised too the difference it makes. Cuts like butter. |
|
| Author: | Bryan Bear [ Fri Sep 15, 2023 2:17 pm ] |
| Post subject: | Re: I learned the value of the paring chisel! |
I recently say a Rob Cossman video where he mentioned having a chisel at a shallow angle set aside specifically for use in softwoods. Obviously you wouldn't chop a mortise in hardwood with it but seems like a great idea to have a specialty chisel set up for this type of operation (brace shaping)! |
|
| Author: | banjopicks [ Sun Sep 17, 2023 6:35 am ] |
| Post subject: | Re: I learned the value of the paring chisel! |
In addition to to this, does the curved chisel make any difference.? I care the curves pretty easily with my flat chisel. |
|
| Author: | joshnothing [ Sun Sep 17, 2023 5:21 pm ] |
| Post subject: | Re: I learned the value of the paring chisel! |
I’ve always just gone bevel down with a regular chisel to pare the scallops Sent from my iPhone using Tapatalk |
|
| Page 1 of 1 | All times are UTC - 5 hours |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|