| Official Luthiers Forum! http://w-ww.luthiersforum.com/forum/ |
|
| Made a joining fixture http://w-ww.luthiersforum.com/forum/viewtopic.php?f=10101&t=55975 |
Page 1 of 1 |
| Author: | Ken Nagy [ Sat Oct 14, 2023 4:36 pm ] |
| Post subject: | Made a joining fixture |
I have a bunch of wood re-sawn for tops and backs. Thin wood is a lot harder to join than violin, viola, archtop wood. I made a fixture from scraps. Hardboard stiffened with pine cut from the 1X2's for the table/storage unit I made. It has a 3/4" slope so the plane with the corrugated bottom works. I got 3 bellies and a back glued in the last 2 hours. Let the HHG set for 1/2 hour, and move it to a flat surface. Seems to work. I do have to use the heat gun, it's about 66 down there. It's was 63 this morning. I went through a TBS of glue already doing the fixture, and the 4 plates. Attachment: IMG_1529.jpg Attachment: IMG_1530.jpg
|
|
| Author: | sdsollod [ Sat Oct 14, 2023 4:38 pm ] |
| Post subject: | Re: Made a joining fixture |
Nice! Sometimes I enjoy making jigs! |
|
| Page 1 of 1 | All times are UTC - 5 hours |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|