***** Guitar Project Jigs, Tools & Techniques Online Resources Archives OLF Video Page Library of plans MP3 Library Inlay Class
Offical Luthiers Forum





And our community proudly sponsored by:

RC Tonewoods | Stewart MacDonald | LuthiersForum
TasmanianTonewoods | OLF | OLF MERCH
Luthier Suppliers | Pacific Coast Woods | ELEVATE
OLF X | Tasmanian Acoustic Tonewood | Luthiers Forum Store!
Luthiers Forum | OLF Facebook | AVAIL SPACE
OLF | Alaska Specialty Woods | A.Hix Tonewood
Duke of Pearl | Birkonium CNC | Space




Official Luthiers Forum!

Owned and operated by Lance Kragenbrink
It is currently Tue Nov 26, 2024 1:33 am


Board index » Luthiers Forum Rooms » Guitar Building Forum

All times are UTC - 5 hours


Forum rules


Be nice, no cussin and enjoy!




Post new topic Reply to topic  Page 1 of 1
  [ 8 posts ] 
  Print view Previous topic | Next topic 
Author Message
guitarmaker78
 Post subject: Sanding Zipflex
PostPosted: Sun Dec 24, 2023 3:39 am 
Offline
Cocobolo
Cocobolo

Joined: Mon Apr 18, 2022 5:42 pm
Posts: 112
First name: Thomas
Last Name: T
Focus: Build
Status: Amateur
I’m considering using some zip flex abalone, but I am unsure if it is sandable.

On my first guitar, I had to sand the abalone, and I am unsure if the zip flex can be sanded or not.

If not, what is the technique for installing? Set it below the surface of the wood and sand the wood down even?
Top
 Profile  
 
martintaylor
 Post subject: Re: Sanding Zipflex
PostPosted: Sun Dec 24, 2023 4:23 am 
Offline
Contributing Member
Contributing Member
User avatar

Joined: Tue Mar 05, 2013 7:30 am
Posts: 202
Location: Central Coast, NSW
First name: Martin
Last Name: Taylor
City: Central Coast
State: NSW
Country: Australia
Focus: Build
Status: Amateur
guitarmaker78 wrote:
I’m considering using some zip flex abalone, but I am unsure if it is sandable.

On my first guitar, I had to sand the abalone, and I am unsure if the zip flex can be sanded or not.

If not, what is the technique for installing? Set it below the surface of the wood and sand the wood down even?

Zipfkex is real she’ll so can be sanded. There is the same health risk so make sure you have adequate protection.


Sent from my iPhone using Tapatalk

_________________
Martin Taylor
http://martintaylorguitars.com.au
Top
 Profile  
 
SteveSmith
 Post subject: Sanding Zipflex
PostPosted: Sun Dec 24, 2023 5:07 am 
Offline
Contributing Member
Contributing Member
User avatar

Joined: Wed Oct 08, 2008 11:36 am
Posts: 7378
Location: Southeast US
City: Lenoir City
State: TN
Zip/Postal Code: 37772
Country: US
Focus: Repair
I try to install it as close to level with the wood surface as possible, just a few thousandths above, to minimize sanding but otherwise no issues. Image
Image
Image

_________________
Steve Smith
"Music is what feelings sound like"


These users thanked the author SteveSmith for the post (total 3): Pmaj7 (Wed Dec 27, 2023 3:01 pm) • bcombs510 (Sun Dec 24, 2023 2:30 pm) • guitarmaker78 (Sun Dec 24, 2023 12:57 pm)
Top
 Profile  
 
guitarmaker78
 Post subject: Re: Sanding Zipflex
PostPosted: Sun Dec 24, 2023 12:57 pm 
Offline
Cocobolo
Cocobolo

Joined: Mon Apr 18, 2022 5:42 pm
Posts: 112
First name: Thomas
Last Name: T
Focus: Build
Status: Amateur
SteveSmith wrote:
I try to install it as close to level with the wood surface as possible, just a few thousandths above, to minimize sanding but otherwise no issues. Image
Image
Image


Appreciate the feedback.


These users thanked the author guitarmaker78 for the post: Kbore (Sun Dec 24, 2023 5:21 pm)
Top
 Profile  
 
Kbore
 Post subject: Re: Sanding Zipflex
PostPosted: Sun Dec 24, 2023 5:20 pm 
Offline
Koa
Koa

Joined: Thu Jan 11, 2018 9:19 am
Posts: 529
Location: St. Charles MO
First name: Karl
Last Name: Borum
State: MO
Zip/Postal Code: 63303
Country: United States
Focus: Build
Status: Amateur
The chatoyant part of the zip flex I used was thin on some sections. You want to do minimal sanding.

_________________
Measure Twice,

Karl Borum
Top
 Profile  
 
jfmckenna
 Post subject: Re: Sanding Zipflex
PostPosted: Sun Dec 24, 2023 8:13 pm 
Offline
Brazilian Rosewood
Brazilian Rosewood

Joined: Tue May 13, 2008 10:44 am
Posts: 6256
Location: Virginia
I've only used it twice but never had a problem sanding it. As mentioned keep your tolerance tight but I do that with regular abalone too
Top
 Profile  
 
dofthesea
 Post subject: Re: Sanding Zipflex
PostPosted: Wed Dec 27, 2023 6:34 pm 
Offline
Contributing Member
Contributing Member

Joined: Sat Sep 14, 2013 9:46 pm
Posts: 787
Location: Napa Valley
First name: David
Last Name: Foster
City: Napa
State: CA
Zip/Postal Code: 94558
Country: USA
Focus: Build
Status: Amateur
If possible I try and have the Zipflex a few thousands lower and fill with CA glue. Sanding the zipflex makes me nervous

_________________
https://www.instagram.com/fostinoguitars/
https://www.facebook.com/PuraVidaUkuleles/


These users thanked the author dofthesea for the post: Pmaj7 (Thu Dec 28, 2023 9:57 am)
Top
 Profile  
 
guitarmaker78
 Post subject: Re: Sanding Zipflex
PostPosted: Thu Dec 28, 2023 3:42 am 
Offline
Cocobolo
Cocobolo

Joined: Mon Apr 18, 2022 5:42 pm
Posts: 112
First name: Thomas
Last Name: T
Focus: Build
Status: Amateur
dofthesea wrote:
If possible I try and have the Zipflex a few thousands lower and fill with CA glue. Sanding the zipflex makes me nervous


Sounds like a good strategy.
Top
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  Page 1 of 1
  [ 8 posts ] 

Board index » Luthiers Forum Rooms » Guitar Building Forum

All times are UTC - 5 hours


Who is online

Users browsing this forum: No registered users and 69 guests

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Jump to:  
Powered by phpBB® Forum Software © phpBB Group
phpBB customization services by 2by2host.com