| Official Luthiers Forum! http://w-ww.luthiersforum.com/forum/ |
|
| Pucker factor level 8 http://w-ww.luthiersforum.com/forum/viewtopic.php?f=10101&t=56161 |
Page 1 of 1 |
| Author: | SnowManSnow [ Fri Dec 29, 2023 3:24 pm ] |
| Post subject: | Pucker factor level 8 |
One thing that makes me nervous is a big router…. That said…. The luthier tools slot head jig is amazing! Just finished this non traditional headstock … notice it’s a mirror of the finger board extension (which is a mistake turned into a feature haha)  Sent from my iPhone using Tapatalk |
|
| Author: | SnowManSnow [ Fri Dec 29, 2023 3:28 pm ] |
| Post subject: | Re: Pucker factor level 8 |
I gotta say I should have built in a cut away . Aesthetically it would be right I think Sent from my iPhone using Tapatalk |
|
| Author: | sdsollod [ Fri Dec 29, 2023 9:46 pm ] |
| Post subject: | Re: Pucker factor level 8 |
Cool. A Florentine cutaway would fit right in… |
|
| Author: | Ken Nagy [ Sat Dec 30, 2023 7:19 pm ] |
| Post subject: | Re: Pucker factor level 8 |
I go with saws, chisels, planes, and files. They aren't scary. Your builds keep getting cooler. They are all different too. Nice. |
|
| Author: | SnowManSnow [ Sun Dec 31, 2023 4:43 pm ] |
| Post subject: | Re: Pucker factor level 8 |
Ken Nagy wrote: I go with saws, chisels, planes, and files. They aren't scary. Your builds keep getting cooler. They are all different too. Nice. Thanks Ken.,,. It’s funny I had a guy over to the shop over the weekend and I was telling him how scary really sharp chisels are haha…. Guess I have a tool phobia … I’ll just tally it up w all the others haha Sent from my iPhone using Tapatalk |
|
| Author: | doncaparker [ Sun Dec 31, 2023 5:15 pm ] |
| Post subject: | Re: Pucker factor level 8 |
I think fear of routers is perfectly appropriate. Losing that fear increases your chances of getting hurt! The LuthierTool slotting jig is pretty cool. I do a lot of slot heads, and they go much faster and cleaner since I bought that jig. |
|
| Author: | SnowManSnow [ Sun Dec 31, 2023 8:48 pm ] |
| Post subject: | Re: Pucker factor level 8 |
doncaparker wrote: I think fear of routers is perfectly appropriate. Losing that fear increases your chances of getting hurt! The LuthierTool slotting jig is pretty cool. I do a lot of slot heads, and they go much faster and cleaner since I bought that jig. It’s great… I DIG accidentally dig into the side of one of the guides … can’t believe I did that. Was able to just remove the other side and flip it over to finish the job on the other side :/ Sent from my iPhone using Tapatalk |
|
| Author: | Mark Mc [ Mon Jan 01, 2024 5:22 am ] |
| Post subject: | Re: Pucker factor level 8 |
I think your mistake ended up looking cool, and I always love seeing a 13-fret neck (did I count right?). I also use and like that Luthier tools jig. |
|
| Author: | phavriluk [ Mon Jan 01, 2024 10:47 am ] |
| Post subject: | Re: Pucker factor level 8 |
That slot head routing tool looks like a wonderful tool, but my arm can't reach that far into my jeans. Sigh. |
|
| Author: | bobgramann [ Mon Jan 01, 2024 11:07 am ] |
| Post subject: | Re: Pucker factor level 8 |
I have one of those tools. I bought it after making a few over the years out of wood. I finally sprung for the tool because I kept wearing the wooden ones (until I got the tool I had been using a pattern bit in the router—the idea of using a template guide on the router hadn’t occurred to me). The tool was expensive, but it was worth it—it’s easy to use and repeatable. Nice looking guitar. |
|
| Author: | Clay S. [ Mon Jan 01, 2024 12:51 pm ] |
| Post subject: | Re: Pucker factor level 8 |
SnowManSnow wrote: I gotta say I should have built in a cut away . Aesthetically it would be right I think Sent from my iPhone using Tapatalk You still can! Many Florentine cutaways were added to guitars that originally didn't have a "cutaway" until the wood was cut away. |
|
| Author: | SnowManSnow [ Mon Jan 01, 2024 3:41 pm ] |
| Post subject: | Re: Pucker factor level 8 |
Mark Mc wrote: I think your mistake ended up looking cool, and I always love seeing a 13-fret neck (did I count right?). I also use and like that Luthier tools jig. 12.5 Sent from my iPhone using Tapatalk |
|
| Page 1 of 1 | All times are UTC - 5 hours |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|