Kbore wrote:
That was time well spent. Hot hide glue in a squeeze bottle sitting in the pot....who knew?
Tha's how Grumpy used to do it if I recall correctly? I'm also not going to lie to you guys. Their set-up is better than mine.
| Official Luthiers Forum! http://w-ww.luthiersforum.com/forum/ |
|
| Interesting Japanese Guitar Building YouTube http://w-ww.luthiersforum.com/forum/viewtopic.php?f=10101&t=56253 |
Page 1 of 1 |
| Author: | ballbanjos [ Tue Jan 30, 2024 8:39 pm ] |
| Post subject: | Interesting Japanese Guitar Building YouTube |
This is a link to a video of the K Yairi factory. Lots of interesting stuff here, but seeing the bindings and sides bent together and the final buffing done after the strings are on were pretty interesting things to me as were the great Japanese hand tools... Lotsa ways to skin the cat... https://www.youtube.com/watch?v=60YoCon1ux8 Dave |
|
| Author: | Kbore [ Tue Jan 30, 2024 10:21 pm ] |
| Post subject: | Re: Interesting Japanese Guitar Building YouTube |
That was time well spent. Hot hide glue in a squeeze bottle sitting in the pot....who knew? |
|
| Author: | Darrel Friesen [ Wed Jan 31, 2024 10:07 pm ] |
| Post subject: | Re: Interesting Japanese Guitar Building YouTube |
Kbore wrote: That was time well spent. Hot hide glue in a squeeze bottle sitting in the pot....who knew? Tha's how Grumpy used to do it if I recall correctly? I'm also not going to lie to you guys. Their set-up is better than mine.
|
|
| Author: | SteveSmith [ Thu Feb 01, 2024 7:16 am ] |
| Post subject: | Interesting Japanese Guitar Building YouTube |
I do my hot hide glue in a squeeze bottle in the glue pot. A stainless steel bolt in the bottle keeps it floating upright. And yes, I learned that from Grumpy. I like the heaters they have for tops, backs and other pieces they are gluing with hide glue. Impressive that a builder would choose hide glue and not go with one of the high tech, RF cured adhesives. |
|
| Author: | Terence Kennedy [ Thu Feb 01, 2024 9:16 pm ] |
| Post subject: | Re: Interesting Japanese Guitar Building YouTube |
Lots of confidence removing the finish for the bridge. No masking and wielding a big curved chisel. They rout their brace slots in the lining with a Dremel and the SM base just like I do. I use a squeeze bottle for hide too thanks to Grumpy. Good video |
|
| Author: | Durero [ Fri Feb 02, 2024 4:20 pm ] |
| Post subject: | Re: Interesting Japanese Guitar Building YouTube |
Really enjoyed watching that. Thanks for posting. |
|
| Page 1 of 1 | All times are UTC - 5 hours |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|