| Official Luthiers Forum! http://w-ww.luthiersforum.com/forum/ |
|
| Totally and completely off topic but cool... http://w-ww.luthiersforum.com/forum/viewtopic.php?f=10101&t=56384 |
Page 1 of 1 |
| Author: | ballbanjos [ Wed Feb 07, 2024 7:46 pm ] |
| Post subject: | Totally and completely off topic but cool... |
https://www.youtube.com/watch?v=flC7FVnPhnQ Japanese Shovel Makers. I love seeing how industrial processes work, especially when it's only semi-automated. Seems to me that a lot of this video is not at all unlike guitar building processes, but as I say totally off topic but cool just the same. Dave |
|
| Author: | Pat Foster [ Wed Feb 07, 2024 9:06 pm ] |
| Post subject: | Re: Totally and completly off topic but cool... |
That was interesting, seeing the machinery used. Wouldn't OSHA have a heyday in that factory. But Japanese values and culture probably don't make an organization like that necessary. The final product looks a little like Japanese chisels. |
|
| Author: | Darrel Friesen [ Thu Feb 08, 2024 10:37 am ] |
| Post subject: | Re: Totally and completly off topic but cool... |
Pretty cool. I've seen a few shovel guitars out there so it's applicable! |
|
| Author: | Ken Nagy [ Thu Feb 08, 2024 11:27 am ] |
| Post subject: | Re: Totally and completely off topic but cool... |
I worked in a forging shop for 20 years. There is really no comparison to a punch press, and 1,000 to 4,000 ton forging presses. But the ovens and all that stuff is similar. Luckily, I was in the tool room, and not on the floor. Dozens of those things make a lot of racket. Yes. Sometimes your dial indicator would jump with the cycles! Notice that they do seem to have quality control at every station. Sometimes every part. |
|
| Page 1 of 1 | All times are UTC - 5 hours |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|