Official Luthiers Forum!
http://w-ww.luthiersforum.com/forum/

Plug For A StewMac Product
http://w-ww.luthiersforum.com/forum/viewtopic.php?f=10101&t=56696		 Page 1 of 1
Author:  Terence Kennedy [ Sat Jul 27, 2024 10:22 am ]
Post subject:  Plug For A StewMac Product
I have used homemade tuner clamps and old guitar strings for crack repair but got a particularly nasty side crack in and decided to order some extra clamps, wire, and tie blocks from StewMac.

I must say they work great. The wire is .014 and very strong, much better than guitar strings and the tie blocks hold very well. Wire is pricey but you pretty much get a lifetime supply. You can put a short piece in a pin vice and use it to make a tiny hole in a glued crack to put patches in difficult to reach areas.

I was impressed.

ImageIMG_9428 by Terence Kennedy, on Flickr


ImageIMG_9429 by Terence Kennedy, on Flickr
Author:  Kbore [ Sat Jul 27, 2024 2:23 pm ]
Post subject:  Re: Plug For A StewMac Product
That is a nasty crack...
Author:  Chris Pile [ Sat Jul 27, 2024 3:05 pm ]
Post subject:  Re: Plug For A StewMac Product
Oh, yeah. I built one of those way back in the day from some scrap wood and an old tuning machine. I think I was inspired by Don Teeter? Pretty sure it was before StewMac and Dan Erlewine teamed up. Very handy, indeed - especially on the right repair.
Author:  Hesh [ Sun Jul 28, 2024 3:05 am ]
Post subject:  Re: Plug For A StewMac Product
Really nice work Terry.
Page 1 of 1 All times are UTC - 5 hours
Powered by phpBB® Forum Software © phpBB Group
http://www.phpbb.com/