| Official Luthiers Forum! http://w-ww.luthiersforum.com/forum/ |
|
| Brazilian rosewood 12 string with Brazilian rosewood neck… http://w-ww.luthiersforum.com/forum/viewtopic.php?f=10101&t=56842 |
Page 1 of 1 |
| Author: | Brad Goodman [ Mon Oct 21, 2024 5:31 pm ] |
| Post subject: | Brazilian rosewood 12 string with Brazilian rosewood neck… |
I was able to get the back, sides, and neck out of one board I had of Brazilian Rosewood, so I just had to do it… Dreadnought shape. Ultra light Sitka Spruce top from Brent Cole/Alaska Specialty Woods Brazilian rosewood back, sides, neck, fretboard, binding, bridge, and head veneer X Braced 24.9” scale Schaller tuners Nitro finish         Sent from my iPhone using Tapatalk |
|
| Author: | Jim Watts [ Mon Oct 21, 2024 5:54 pm ] |
| Post subject: | Re: Brazilian rosewood 12 string with Brazilian rosewood nec |
Beautiful! |
|
| Author: | bcombs510 [ Mon Oct 21, 2024 6:07 pm ] |
| Post subject: | Re: Brazilian rosewood 12 string with Brazilian rosewood nec |
Lovely, Brad! Sent from my iPhone using Tapatalk Pro |
|
| Author: | SteveSmith [ Mon Oct 21, 2024 6:07 pm ] |
| Post subject: | Re: Brazilian rosewood 12 string with Brazilian rosewood nec |
Jim Watts wrote: Beautiful! Indeed! |
|
| Author: | meddlingfool [ Mon Oct 21, 2024 6:18 pm ] |
| Post subject: | Re: Brazilian rosewood 12 string with Brazilian rosewood nec |
Purty! |
|
| Author: | J De Rocher [ Mon Oct 21, 2024 7:57 pm ] |
| Post subject: | Re: Brazilian rosewood 12 string with Brazilian rosewood nec |
Wow! |
|
| Author: | Terence Kennedy [ Mon Oct 21, 2024 11:25 pm ] |
| Post subject: | Re: Brazilian rosewood 12 string with Brazilian rosewood nec |
I like that! Is the neck much heavier than Mahogany? |
|
| Author: | Hesh [ Tue Oct 22, 2024 4:15 am ] |
| Post subject: | Re: Brazilian rosewood 12 string with Brazilian rosewood nec |
Nice Brad and what a shine too!! How's it sound my bet is pretty fantastic! |
|
| Author: | Colin North [ Tue Oct 22, 2024 8:18 am ] |
| Post subject: | Re: Brazilian rosewood 12 string with Brazilian rosewood nec |
Lovely! Actually I've been trying different, denser, woods for necks - Padauk, Hard maple, Wenge, and seem to notice some improvement in the sound (projection/sustain?) As I'm doing heavier builds anyway (double sides at 2.6 - 3mm with epoxy) so balance doesn't seem a problem and any improvement could be down to just weight (as in Gore's Book where he uses weighed sides) |
|
| Author: | Juergen [ Tue Oct 22, 2024 8:52 am ] |
| Post subject: | Re: Brazilian rosewood 12 string with Brazilian rosewood nec |
Very nice guitar! Your name on the head.....do you make it yourself or do you have a supplier who can cut abalone with a laser? Juergen Gesendet von meinem SM-G950F mit Tapatalk |
|
| Author: | Darrel Friesen [ Tue Oct 22, 2024 9:50 am ] |
| Post subject: | Re: Brazilian rosewood 12 string with Brazilian rosewood nec |
Wow! You sure did that Brazilian justice Brad. |
|
| Author: | Kbore [ Tue Oct 22, 2024 10:18 am ] |
| Post subject: | Re: Brazilian rosewood 12 string with Brazilian rosewood nec |
THats a peach! |
|
| Author: | Brad Goodman [ Tue Oct 22, 2024 4:44 pm ] |
| Post subject: | Re: Brazilian rosewood 12 string with Brazilian rosewood nec |
Terence Kennedy wrote: I like that! Is the neck much heavier than Mahogany? Yes, it is heavier than Mahogany,I started using really light weight truss rods from Allied Lutherie and the Schaller mini tuners are pretty ligt so it is not neck heavy. |
|
| Author: | Brad Goodman [ Tue Oct 22, 2024 6:00 pm ] |
| Post subject: | Re: Brazilian rosewood 12 string with Brazilian rosewood nec |
Hesh wrote: Nice Brad and what a shine too!! How's it sound my bet is pretty fantastic! It sounds great!. If I could figure out how to post a video on here I would..... |
|
| Author: | Brad Goodman [ Tue Oct 22, 2024 6:02 pm ] |
| Post subject: | Re: Brazilian rosewood 12 string with Brazilian rosewood nec |
Juergen wrote: Very nice guitar! Your name on the head.....do you make it yourself or do you have a supplier who can cut abalone with a laser? Juergen Gesendet von meinem SM-G950F mit Tapatalk It is cut on a CNC machine (not a laser) by Tom Ellis of Precision Pearl in Texas-Great Company to deal with. |
|
| Page 1 of 1 | All times are UTC - 5 hours |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|