Official Luthiers Forum!
http://w-ww.luthiersforum.com/forum/

An alternative wood glue
http://w-ww.luthiersforum.com/forum/viewtopic.php?f=10101&t=56895		 Page 1 of 1
Author:  Tim McKnight [ Thu Nov 21, 2024 8:38 pm ]
Post subject:  An alternative wood glue
I saw a thread where they were discussing a replacement for LMII’s yellow glue. I tried it early on and found it no better than TiteBond. I’ve never been a fan of TiteBond original wood glue either but that’s another topic.

My friend John Greven introduced me to a wood glue many years ago that was sold through a tool supply house. They discontinued that glue but through some digging, an employee shared the manufacturer which they sourced it from. That company is Spectrum Adhesives. I have been using it for at least 15 years with excellent results. It’s a white glue, that dries EXTREMELY hard on par with HHG, dries clear, is sandable, is reversible with heat and water, does NOT cold creep and best of all it has very good tack or grip and doesn’t slide around like TiteBond does. I believe the minimum order is 1 gallon, which costs about $20. The part number is CP-0101.

https://www.spectrumadhesives.com/
Author:  bcombs510 [ Thu Nov 21, 2024 8:52 pm ]
Post subject:  Re: An alternative wood glue
Thanks for sharing that! It sounds similar to the Titebond invisible I’ve used for the last few instruments but better and at a fraction of a fraction of the cost!


Sent from my iPhone using Tapatalk Pro
Author:  J De Rocher [ Thu Nov 21, 2024 11:14 pm ]
Post subject:  Re: An alternative wood glue
I didn't find that part number on their website or a way to buy it. Do you need to contact the company directly to purchase it?

Brad - Glad to know I'm not alone in using the Titebond Translucent. I switched to it in 2017 after LMI changed their white glue to the yellow glue which I did not like at all.
Author:  bcombs510 [ Thu Nov 21, 2024 11:38 pm ]
Post subject:  Re: An alternative wood glue
The site is weird. Here it is:

https://cpadhesives.com/products/cp-010 ... 0244905115


Sent from my iPhone using Tapatalk Pro
Author:  meddlingfool [ Thu Nov 21, 2024 11:41 pm ]
Post subject:  Re: An alternative wood glue
Thanks for the tip!
Author:  bcombs510 [ Thu Nov 21, 2024 11:46 pm ]
Post subject:  An alternative wood glue
TDS says 12 month shelf life so plan accordingly. At the price, nobody will be heartbroken about waste.

https://cdn.shopify.com/s/files/1/0502/ ... 1614628862


Sent from my iPhone using Tapatalk Pro
Author:  Hesh [ Fri Nov 22, 2024 4:46 am ]
Post subject:  Re: An alternative wood glue
Howdy Tim!! Great tip!
Author:  bcombs510 [ Fri Nov 22, 2024 8:43 am ]
Post subject:  Re: An alternative wood glue
On its way. $14.00 of glue. $25.00 of shipping from just north east of Columbus , about 2 hours from me. $39.50 total.

I am paying $6.50 for 8 oz of Titebond translucent at the moment via Amazon. One gallon worth would be $104.00.

Will be interesting to see how much of a gallon I get through in 12 months. :)

Jay, I’m pretty sure your previous endorsement of the translucent is how I started using it. It’s actually a nice glue and Amazon has it here same day most times I’ve ordered it.

https://youtu.be/BGEAiUeiaKs?si=LrBauTu1423PKKWT

Prime Before!


Sent from my iPhone using Tapatalk Pro
Author:  Pat Foster [ Fri Nov 22, 2024 10:54 am ]
Post subject:  Re: An alternative wood glue
Sounds like this glue, which I like a lot. It has all the properties of the glue Tim mentioned.

https://www.leevalley.com/en-us/shop/tools/supplies/adhesives/glue/45104-lee-valley-cabinetmakers-glue-2002-gf?item=62K0111
Author:  bobgramann [ Fri Nov 22, 2024 1:07 pm ]
Post subject:  Re: An alternative wood glue
I ordered a gallon of the CP-0101 figuring I could give most of it away to anyone who asked. I got an email from them asking if I had intended to order it. They were having problems with the website and just today they got 3 separate orders for a gallon, unprecedented in their history. I sent them back an email explaining. My gallon is on its way.
Author:  bcombs510 [ Fri Nov 22, 2024 1:18 pm ]
Post subject:  Re: An alternative wood glue
Ha! They thought they were under attack by glue ordering bots!! :D


Sent from my iPhone using Tapatalk Pro
Author:  Tim McKnight [ Fri Nov 22, 2024 6:18 pm ]
Post subject:  Re: An alternative wood glue
Sorry for not pointing it out earlier but I always call them to order. Keep the glue in a cool dark place and it will outlast its shelf life. Write the date on the jug when you receive it and after a year, smell the glue. If it smells sour then it’s over the hill for lutherie but still suitable for misc hobby uses. I use the old glue to glue shut cardboard boxes when I ship something. I’ve had the glue last 2+ years before souring.

BTW, I’ve used this glue on plastic bindings with excellent results. I rarely use plastic bindings but when I do, this stuff works well.

If a gallon is too much for you then share the glue with a buddy. Or if there is a local lutherie group which you belong to then share it with them. It’s an excellent furniture glue as well.

BTW, I glue side purflings to bindings before bending the bindings and this glue is not good for that application because it comes loose under the bender’s heat. I use TiteBond III for this application as it will withstand the heat in the bender.
Author:  bftobin [ Fri Nov 22, 2024 6:38 pm ]
Post subject:  Re: An alternative wood glue
I've been using the Lee Valley 2002 glue for +35 years, and it does sound like the same thing except for the color when dry. A few years ago I found a piano supply place that sells the white version that dries pretty clear (translucent). Another nice attribute is that it doesn't soak into the wood, it stays on the surface. If you need to undo a joint, heat will do it very nicely, AND it's fast and easy to remove any residue with a sharp scraper.
I still use HHG with a pinch of aluminum sulfate and sometimes a drop of acetic acid, depending on the situation.

Brent
Author:  Glen H [ Fri Nov 22, 2024 7:03 pm ]
Post subject:  Re: An alternative wood glue
bobgramann wrote:
I ordered a gallon of the CP-0101 figuring I could give most of it away to anyone who asked. I got an email from them asking if I had intended to order it. They were having problems with the website and just today they got 3 separate orders for a gallon, unprecedented in their history. I sent them back an email explaining. My gallon is on its way.


lol I got the same. I replied back that word got out on OLF about their glue.
Author:  Darrel Friesen [ Fri Nov 22, 2024 7:15 pm ]
Post subject:  Re: An alternative wood glue
I'm still labouring processing this moose hide but thinking about the advantages of which you guys speak! :)
Author:  doncaparker [ Fri Nov 22, 2024 7:29 pm ]
Post subject:  Re: An alternative wood glue
As much as I like tinkering with new things, I'm pretty stubborn about using hide glue for most guitar glue ups and, well, I kinda overbought when LMI was shutting down:

Attachment:
Glue.jpg


There's more in another cabinet. :)
Author:  bftobin [ Fri Nov 22, 2024 7:40 pm ]
Post subject:  Re: An alternative wood glue
Darrel Friesen wrote:
I'm still labouring processing this moose hide but thinking about the advantages of which you guys speak! :)


Darrel, you can get the white/translucent glue from Bolduc Pianos in Quebec.They have a website. I also bought some really nice white spruce 1"X1.25"X 48". It's straight, dry and quarter-cut for about $20.00 CDN ( or $1.99 US i think, with the present exchange rate, lol). The white spruce is great for braces and you can't beat the price.

Brent
Author:  Colin North [ Sat Nov 23, 2024 4:26 am ]
Post subject:  Re: An alternative wood glue
Thanks for the recommendation Tim.
Good to have you drop in.
Author:  meddlingfool [ Sat Nov 23, 2024 1:02 pm ]
Post subject:  Re: An alternative wood glue
Brent,

Would you so kind as to measure the density of the white spruce rib stock?
Page 1 of 1 All times are UTC - 5 hours
Powered by phpBB® Forum Software © phpBB Group
http://www.phpbb.com/