| Official Luthiers Forum! http://w-ww.luthiersforum.com/forum/ |
|
| Looking for Kalamazoo KG11 blueprint http://w-ww.luthiersforum.com/forum/viewtopic.php?f=10101&t=56951 |
Page 1 of 1 |
| Author: | Yairf [ Thu Jan 16, 2025 12:00 pm ] |
| Post subject: | Looking for Kalamazoo KG11 blueprint |
Hi Anyone knows where I can get Kalamazoo KG11 blueprint/tracing? Thanks |
|
| Author: | Hesh [ Fri Jan 17, 2025 5:20 am ] |
| Post subject: | Re: Looking for Kalamazoo KG11 blueprint |
There isn't one, no one has ever drawn up plans. For inspiration you might check-out the Collings Waterloo line of guitars they make one inspired by the KG-11. Also Gibson L-OOs are what the KG-11 is based on originally as a no frills version for further inspiration. |
|
| Author: | Yairf [ Sat Jan 18, 2025 10:47 am ] |
| Post subject: | Re: Looking for Kalamazoo KG11 blueprint |
Thanks Hesh, I think the L-00 is x braced and also the KG -11 has a smaller body compared to L-00 will keep on searching. a rough tracing will also do the work. |
|
| Author: | Mark Fogleman [ Sat Jan 18, 2025 8:25 pm ] |
| Post subject: | Re: Looking for Kalamazoo KG11 blueprint |
I would ask Dan Erlewine. https://www.elderly.com/products/iris-guitar-company-de-11-dan-erlewine-signature-model-acoustic-guitar |
|
| Author: | Hesh [ Sun Jan 19, 2025 4:57 am ] |
| Post subject: | Re: Looking for Kalamazoo KG11 blueprint |
Yairf wrote: Thanks Hesh, I think the L-00 is x braced and also the KG -11 has a smaller body compared to L-00 will keep on searching. a rough tracing will also do the work. You are very welcome. Some L-OOs were ladder braced the earlier ones and the later ones were X braced so this model was available as the bracing transitioned at Gibson. Mark's post about Dan and the Iris model is a great idea to contact Dan. |
|
| Page 1 of 1 | All times are UTC - 5 hours |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|