+1
Sent from my iPhone using Tapatalk Pro
| Official Luthiers Forum! http://w-ww.luthiersforum.com/forum/ |
|
| Luthier Tips du Jour video - Broken end block repair http://w-ww.luthiersforum.com/forum/viewtopic.php?f=10101&t=57004 |
Page 1 of 1 |
| Author: | Robbie O'Brien [ Mon Mar 10, 2025 10:03 am ] |
| Post subject: | Luthier Tips du Jour video - Broken end block repair |
Here is the latest Luthier Tips du Jour video. In this video I discuss repairing a broken end block. This video as well as all my other videos are available via my website, https://lutherieacademy.com/videos , or on YouTube. Don't forget to subscribe to the O'Brien Guitars YouTube channel if you want to get the latest Luthier Tips du Jour videos when they are released. CLICK HERE TO WATCH VIDEO |
|
| Author: | Chris Pile [ Mon Mar 10, 2025 11:00 am ] |
| Post subject: | Re: Luthier Tips du Jour video - Broken end block repair |
I need to invest in more magnets, I think. Good stuff, Rob. |
|
| Author: | phavriluk [ Tue Mar 25, 2025 6:42 pm ] |
| Post subject: | Re: Luthier Tips du Jour video - Broken end block repair |
For those of us who are building, I suggest (horrors!) using birch plywood for an end block. It ain't never going to split. |
|
| Author: | SteveSmith [ Tue Mar 25, 2025 7:05 pm ] |
| Post subject: | Re: Luthier Tips du Jour video - Broken end block repair |
phavriluk wrote: For those of us who are building, I suggest (horrors!) using birch plywood for an end block. It ain't never going to split. Agreed, I’ve been doing that for a long time. Sent from my iPhone using Tapatalk |
|
| Author: | bcombs510 [ Tue Mar 25, 2025 7:53 pm ] |
| Post subject: | Re: Luthier Tips du Jour video - Broken end block repair |
+1 Sent from my iPhone using Tapatalk Pro |
|
| Author: | surveyor [ Wed Mar 26, 2025 8:48 am ] |
| Post subject: | Re: Luthier Tips du Jour video - Broken end block repair |
I've always inlaid a plywood strip (vertical placement) on the end block, on the back side of the block. I only build for a hobby and not production, so I have whatever time I need to do steps like this. |
|
| Page 1 of 1 | All times are UTC - 5 hours |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|