Official Luthiers Forum!

That's the one. They also come in gold, but I'm not sure if there's a difference or not. If you can find some older ones(try a Mom&Pop hardware store), the kerf was even narrower.

I also like the 24 tooth one.

Forrest.

Hank

_________________
Hank Mauel

Freud Diablo, thanks Mario from 5 years ago. Same blade on the saw from 5 years ago, cut through some thick and nasty, knotty planks too. I've cut 1-1/2" thick ebony with no prolems. Now I only use the 24 tooth so I tend to sand all my cuts before any gluing, but I bet if I got the 40 tooth, I could go right to gluing after the cut.

It is a matter of opinion though, and everyone is entitled to their own right?

Now if Lillian is still following all this banter about tablesaw blades, she will have seen the recommendations and has probably purchased her blade by now.

_________________
My Facebook Guitar Page

"There's really no wrong way, as long as the results are what's desired." Charles Fox

"We have to constantly remind ourselves what we're doing....No Luthier is putting a man on the moon!" Harry Fleishman

"Generosity is always different in the eye of the person who didn't receive anything, but who wanted some." Waddy Thomson

LOL Yes, I'm still reading but no Rod, I haven't bought anything yet. I've been working out of town all week and just got home. Well, I'm here long enough to get dinner and dump my dirty cloths before I have to work an overnight job. People seem to get pissy when we shut down three lanes of I-5 during the day, so.... It was a nice note to find tape to my monitor when we got back to the office.

Oh, and thanks for all the input. Its been very insightful. I do appreciate it.Aoibeann39016.9250810185

_________________
Aoibeann

I-5, ok so you live on the west coast..... state? city?

_________________
My Facebook Guitar Page

"There's really no wrong way, as long as the results are what's desired." Charles Fox

"We have to constantly remind ourselves what we're doing....No Luthier is putting a man on the moon!" Harry Fleishman

"Generosity is always different in the eye of the person who didn't receive anything, but who wanted some." Waddy Thomson

WA, Federal Way

_________________
Aoibeann

Ahhhh, So, do you go to GAL this year?

Another Pacific Northwest member. Great

_________________
My Facebook Guitar Page

"There's really no wrong way, as long as the results are what's desired." Charles Fox

"We have to constantly remind ourselves what we're doing....No Luthier is putting a man on the moon!" Harry Fleishman

"Generosity is always different in the eye of the person who didn't receive anything, but who wanted some." Waddy Thomson

Rod, I was so psyched to go to GAL this year. It was all I talked about for about a month leading up to it. And as fate would have it, I had to work that weekend. So, no, regretfully, I didn't go.


BUT.... there is always next year!

_________________
Aoibeann

Isn't it every other year? I'm not totally sure. Sorry to disapoint if it is .

I'll have to get down there for the 2008 GAL convention.

_________________
My Facebook Guitar Page

"There's really no wrong way, as long as the results are what's desired." Charles Fox

"We have to constantly remind ourselves what we're doing....No Luthier is putting a man on the moon!" Harry Fleishman

"Generosity is always different in the eye of the person who didn't receive anything, but who wanted some." Waddy Thomson

Oh Rod, say it isn't so. Woe is me. A whole nother year?? Oh well. I guess I would have figured it out soon enough. But thanks for pointing it out.

_________________
Aoibeann