Official Luthiers Forum!

Hi again. I posted a question last night about spherical or cylindrical dishes. Really appreciate the input. It was asked that I post some pics. Here are the dishes and router rails ready to go. I decided to go spherical.Also you'll notice my form that I went with. I think it will give me the flexibility in the future. Always thinking ahead! Here is the thickness I made from some walnut scraps and a $7 dial from Harbor Freight. You learn so much on this site.And a couple of pics of my horse barn turn shop that I've been putting together for a couple of years. I'm having troubles with uploading pics, it wants them in fomats that I don't know how to save as. Anyway, hope this works.

Ok, try this link to the pics.
http://www.donna-drphotos.com/shop

Hey Rich, I'm having trouble downloading those pics. You gotta make 'em smaller for the internet. 150 pixels and you need 30 to 50K size usually is sufficient. I checked one of those photos and it was 150K or larger. Nice work, looking good.

_________________
http://www.dickeyguitars.com

The format needed is JPG a standard graphic format? your image software should have this format availible. open the pic use the "save as" command pick the jpg extension.

My software could not reduce them or save as another extension, so I put a link to them from my wife's website. I'll have to work on posting pics so that I don't have to keep routing folks to another site just to see my mistakes. They are kind of dark, it gets dark here in central Ohio too early for me.
Thanks,
Clinton Rich