| Official Luthiers Forum! http://w-ww.luthiersforum.com/forum/ |
|
| Grizzlys Gold Sanding Discs? http://w-ww.luthiersforum.com/forum/viewtopic.php?f=10102&t=10445 |
Page 1 of 1 |
| Author: | LanceK [ Thu Jan 18, 2007 2:10 am ] |
| Post subject: | |
Anyone use these? Opinions? Grizzly Gold Sanding Discs I am looking at the H&L 8 hole, in 120, 220 and 320 grits. Thanks! |
|
| Author: | Dave Rector [ Thu Jan 18, 2007 3:23 am ] |
| Post subject: | |
I've used them Lance. They work okay, not as good as 3M obviously but not bad for the money. I use the 5 hole 5 inch disks, which I assume asre the same except for size. |
|
| Author: | LanceK [ Thu Jan 18, 2007 3:26 am ] |
| Post subject: | |
Thanks Dave! |
|
| Author: | Pwoolson [ Thu Jan 18, 2007 3:30 am ] |
| Post subject: | |
I've used their gold PSA roll. As Dave said, it's definately NOT 3m. You get what you pay for here. |
|
| Author: | Dave Rector [ Thu Jan 18, 2007 3:37 am ] |
| Post subject: | |
Exactly what Paul said! I now go to a local body shop supply store and get the 3M stuff. I told them I was in business and the cut the price of stuff about 30%. They have lots of cool stuff too! |
|
| Author: | John How [ Thu Jan 18, 2007 3:57 am ] |
| Post subject: | |
I buy most of my sanding supplies here and have had good success with their sanding discs. |
|
| Author: | LanceK [ Thu Jan 18, 2007 3:59 am ] |
| Post subject: | |
Dave, exactly what discs are you using from 3M? and do they come in a Hook and loop 8 hole config? |
|
| Author: | old man [ Thu Jan 18, 2007 5:39 am ] |
| Post subject: | |
I now get all my sanding stuff from Klingspor. Wonderful, German made product. Klingspor Ron |
|
| Author: | Dave Rector [ Thu Jan 18, 2007 6:19 am ] |
| Post subject: | |
Lance, sorry for being vague but I'm not sure what kind of 5-hole disks I have. I was at the supply store a while back and think I only bought some rolls of the sticky back 3M gold and some of the 3M Imperial wet/dry stuff. I'm pretty sure they do have the disks but couldn't tell you if they have them in a 8-hole configuration. I know one thing for sure though, if it is 3M they can easily get it for you. |
|
| Page 1 of 1 | All times are UTC - 5 hours |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|