| Official Luthiers Forum! http://w-ww.luthiersforum.com/forum/ |
|
| Looking for "V" neck dimensions http://w-ww.luthiersforum.com/forum/viewtopic.php?f=10102&t=10550 |
Page 1 of 1 |
| Author: | af_one [ Thu Jan 25, 2007 6:23 am ] |
| Post subject: | |
Does anyone have a Martin with a vintage "V" neck I can get specs from. I played a MArtin OM-18V 14 fret I really liked but did not mic. I could use the depth measurement at the nut, 5th, 7th and 10th. Once I set the depth, I'll just "V" the sides. Sound about right? |
|
| Author: | TonyKarol [ Fri Jan 26, 2007 2:17 am ] |
| Post subject: | |
1929 0-18, 12 fret, 1 7/8 nut width, flat fretbaord as well. 1st fret - .840, 9th - .965, 10th - .990. Its basically straight line from the 1st to the 9th, then gently curves up to the heel. |
|
| Author: | Alain Lambert [ Fri Jan 26, 2007 2:06 pm ] |
| Post subject: | |
This is from Martin site At fret1 and 10 If you scale them to the actual width then you will have an actual template Martin Neck Profile |
|
| Page 1 of 1 | All times are UTC - 5 hours |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|