| Official Luthiers Forum! http://w-ww.luthiersforum.com/forum/ |
|
| Pick Guard Adhesives http://w-ww.luthiersforum.com/forum/viewtopic.php?f=10102&t=10637 |
Page 1 of 1 |
| Author: | MSpencer [ Tue Jan 30, 2007 2:29 pm ] |
| Post subject: | |
I have always used pre-adhesived pickguards either clear or colored. What type of aerosal adhesvies do you guys use Mike |
|
| Author: | MSpencer [ Tue Jan 30, 2007 3:26 pm ] |
| Post subject: | |
Thanks, I was trying to see if anyone purchased from the Borg anything that worked. Mike |
|
| Author: | tippie53 [ Tue Jan 30, 2007 4:12 pm ] |
| Post subject: | |
3M here also john |
|
| Author: | David Collins [ Tue Jan 30, 2007 11:05 pm ] |
| Post subject: | |
I use 3m #467 adhesive, but I'll probably switch to #468 with the next roll I buy. I'm sure that's what the transfer adhesive LMI sells is, and is slightly thicker than the #467 making it easier to apply cleanly and with fewer air bubbles. |
|
| Page 1 of 1 | All times are UTC - 5 hours |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|