| Official Luthiers Forum! http://w-ww.luthiersforum.com/forum/ |
|
| 40 tooth Diablo Saw blades (Where) http://w-ww.luthiersforum.com/forum/viewtopic.php?f=10102&t=1071 |
Page 1 of 1 |
| Author: | LanceK [ Fri Feb 18, 2005 3:33 am ] |
| Post subject: | |
Where did they go? Anybody know where I can get afew of these? I believe the kerf was .042 The last one I bought was around 9 bucks.. Thx |
|
| Author: | tl507362 [ Fri Feb 18, 2005 4:03 am ] |
| Post subject: | |
Lance, What were you using this blade for? Just curious. Isn't this what you are looking for? http://www.freudtools.com/index2.html Tracy |
|
| Author: | LanceK [ Fri Feb 18, 2005 4:06 am ] |
| Post subject: | |
Here it is! Diablo Blade Tracy, I use this blade for everything except fretslotting. Thanks! L Actually looking closer, my blade has a .042 kerf, these are abit wider/ |
|
| Author: | Pwoolson [ Fri Feb 18, 2005 4:10 am ] |
| Post subject: | |
Lance, the Home Depot has a 7 1/4" version of this. I bought a bunch a year or so ago when they were on a 2 for one deal. I think normally they run about $10 |
|
| Author: | LanceK [ Fri Feb 18, 2005 4:22 am ] |
| Post subject: | |
Thanks Paul -- ill check there ... |
|
| Author: | Jimmie D [ Fri Feb 18, 2005 5:23 am ] |
| Post subject: | |
Lance, They have them at the Home Depot here in Memphis. If you have one close to you, you might check there. |
|
| Author: | Dave Rector [ Fri Feb 18, 2005 10:45 pm ] |
| Post subject: | |
I was at Home Depot yesterday and they had both the 24 and 40 tooth Diablo blades. The 24 tooth was $9.99 and the 40 tooth was $13.99, if I remember correctly. |
|
| Author: | LanceK [ Fri Feb 18, 2005 11:00 pm ] |
| Post subject: | |
Great! Thanks Dave -- Ill be headed over there today ... |
|
| Page 1 of 1 | All times are UTC - 5 hours |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|