BUMP......
| Official Luthiers Forum! http://w-ww.luthiersforum.com/forum/ |
|
| Help. Need a piece of Aussie Blackwood http://w-ww.luthiersforum.com/forum/viewtopic.php?f=10102&t=10818 |
Page 1 of 1 |
| Author: | John Watkins [ Thu Feb 08, 2007 7:08 am ] |
| Post subject: | |
I need either one piece of 16/4 x 3" x 27" quartersawn or two piece of 4/4 x 4" x 27" flatsawn. Needs to be the curly stuff. Anybody? |
|
| Author: | peterm [ Thu Feb 08, 2007 12:21 pm ] |
| Post subject: | |
BUMP......
|
|
| Author: | Dave Rector [ Thu Feb 08, 2007 11:59 pm ] |
| Post subject: | |
John, have you talked to Tim at Aussie Tonewoods? |
|
| Author: | Aust Tonewoods [ Fri Feb 09, 2007 1:47 am ] |
| Post subject: | |
I have Pm'd and phoned John regarding this and left a message. regards Tim Australian Tonewoods |
|
| Author: | Kim [ Fri Feb 09, 2007 7:39 am ] |
| Post subject: | |
|
|
| Author: | Dave Rector [ Fri Feb 09, 2007 7:45 am ] |
| Post subject: | |
Just wanted to make sure you didn't get overlooked again Tim.
|
|
| Author: | Dave Rector [ Fri Feb 09, 2007 7:47 am ] |
| Post subject: | |
Barely.... 
|
|
| Author: | John Watkins [ Fri Feb 09, 2007 8:11 am ] |
| Post subject: | |
Actually, I talked to Tim first and then posted this as a last resort. Thanks for the heads up, though. |
|
| Author: | Dave Rector [ Fri Feb 09, 2007 8:30 am ] |
| Post subject: | |
John, if you've tried all our regular sponsors and had no luck, you might try Larry Davis @ Gallery Hardwoods. |
|
| Author: | Shane Neifer [ Fri Feb 09, 2007 9:26 am ] |
| Post subject: | |
John if your REALLY stuck, I have another Aus contact I could try for you. Shane |
|
| Author: | Larry Davis [ Fri Feb 09, 2007 12:25 pm ] |
| Post subject: | |
[QUOTE=Dave Rector] John, if you've tried all our regular sponsors and had no luck, you might try Larry Davis @ Gallery Hardwoods.[/QUOTE] Sure John, I got that. 8/4 flatsawn curly blackwood specifically for laminated necks. I can add it to your tab?
|
|
| Author: | Larry Davis [ Sat Feb 10, 2007 3:21 am ] |
| Post subject: | |
John, I also have 4/4, 6/4 8/4 and 12/4 koa boards and timbers in stock if that helps. |
|
| Author: | Don Williams [ Sat Feb 10, 2007 4:19 am ] |
| Post subject: | |
[QUOTE=Larry Davis] John, I also have 4/4, 6/4 8/4 and 12/4 koa boards and timbers in stock if that helps.[/QUOTE] DROOL........... 
|
|
| Page 1 of 1 | All times are UTC - 5 hours |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|