| Official Luthiers Forum! http://w-ww.luthiersforum.com/forum/ |
|
| Other nitros http://w-ww.luthiersforum.com/forum/viewtopic.php?f=10102&t=10931 |
Page 1 of 1 |
| Author: | Alain Desforges [ Wed Feb 14, 2007 10:55 am ] |
| Post subject: | |
I know the Behlens and the Mohawk are from the same 'parent' company... RPM Wood finishes Group. Also in the line-up: Star, CCI, Guardian, Fletco and Watco... I know Tony Karol uses the Mohawk product. |
|
| Author: | Dave Rector [ Wed Feb 14, 2007 11:04 am ] |
| Post subject: | |
I've used Behlen's once. I used it on my first guitar. I switched to McFadden's and have been using it ever since. I don't remember having any problems with Behlen's, probably just found a better deal on McFadden's. Seems like the McFadden's gives me a little more amber too, which I happen to like. |
|
| Author: | Sylvan [ Wed Feb 14, 2007 12:17 pm ] |
| Post subject: | |
I have used Mohawk for about 15 years and swear by it. |
|
| Author: | tippie53 [ Wed Feb 14, 2007 1:05 pm ] |
| Post subject: | |
I used alot if different ones. Mohawk is about as good and as consistent as I have found. john http://www.bluescreekguitars.com |
|
| Author: | Roy O [ Thu Feb 15, 2007 2:36 am ] |
| Post subject: | |
I just switched from KMT-9 to Maclac. It been used by a number of local luthiers here for a number of years. $27.00 a gallon but I believe it's only sold on the west coast and Hawaii. My daily player was sprayed w/ this 4 years ago and is holding up well. Here's a link to their website which has quite a bit of info on nitro Maclac |
|
| Page 1 of 1 | All times are UTC - 5 hours |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|