| Official Luthiers Forum! http://w-ww.luthiersforum.com/forum/ |
|
| Fingerboard Thickness http://w-ww.luthiersforum.com/forum/viewtopic.php?f=10102&t=11254 |
Page 1 of 1 |
| Author: | Mark Hanna [ Mon Mar 12, 2007 6:16 am ] |
| Post subject: | |
How thick do you guys make your fingerboards from the center or thickest area of the radius? |
|
| Author: | Mike Collins [ Mon Mar 12, 2007 6:33 am ] |
| Post subject: | |
I start with a 7mm thick piece. Mike Collins |
|
| Author: | old man [ Mon Mar 12, 2007 7:43 am ] |
| Post subject: | |
1/4" Ron |
|
| Author: | Joe Beaver [ Mon Mar 12, 2007 2:12 pm ] |
| Post subject: | |
7/32 is what I use. It is part of the master plan..... |
|
| Author: | Mattia Valente [ Fri Mar 16, 2007 5:55 am ] |
| Post subject: | |
7mm here as well, minimum 6mm. |
|
| Page 1 of 1 | All times are UTC - 5 hours |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|