| Official Luthiers Forum! http://w-ww.luthiersforum.com/forum/ |
|
| workbench question http://w-ww.luthiersforum.com/forum/viewtopic.php?f=10102&t=11277 |
Page 1 of 1 |
| Author: | zac_in_ak [ Wed Mar 14, 2007 5:03 pm ] |
| Post subject: | |
ok folks i am at the point in my workbench where i hava to make a decision a 2' x 4' work space focused on hand work or a split work space each 2' x 2' with a divider one side for hand work and the other for power and benchtop tools. any feedback? sorry this is all in small caps im on my palm pilot |
|
| Author: | crazymanmichael [ Wed Mar 14, 2007 11:21 pm ] |
| Post subject: | |
no reason you have to divide it to use a power tool.... |
|
| Author: | gozierdt [ Thu Mar 15, 2007 1:50 am ] |
| Post subject: | |
You would definitely feel cramped on a 2x2 space IMO. If your bench tools are light enough, I'd store them below the benchtop, and lift them up either onto the top, or onto a roll-around cart when you need to use them. |
|
| Page 1 of 1 | All times are UTC - 5 hours |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|