Official Luthiers Forum!

I am gluing a bridge on a 60's gibson LGO and don't expect to be doing this much. so I 'd like to avoid paying tons for thr right deep throat c-clamps. Where is the best place to get them that is reasonable? HOw many should I use?  Thanks

you will need a caul to fit over the bridge, a caul for inside over the brodge plate, and one clamp. you can make a top caul a la stew-mac or an lmi style clamp (which does not require the c-clamp) quite easily yourself, or spend the $25 or so to buy one. the cheapest place i know of for the good ibex clamps is ebay, but grizzly has some clones that are serviceable at fairly low prices.

Three of these will work well.
http://www.amazon.com/Deep-Throat-C-Clamp-5X2-5/dp/B000CC0GR S