| Official Luthiers Forum! http://w-ww.luthiersforum.com/forum/ |
|
| Source for wide belt for Shopnotes sander http://w-ww.luthiersforum.com/forum/viewtopic.php?f=10102&t=11464 |
Page 1 of 1 |
| Author: | SteveF [ Sun Apr 01, 2007 1:44 am ] |
| Post subject: | |
I'm looking for a few sources for a 20" (or 20 1/2")by 48" sanding belt to use as the conveyor belt for my Shopnotes thickness sander. I've found a couple of stores online, but I'm wondering if anyone has a proven winner. One store kept giving error messages during checkout.  Another only sells them in packs of 2. I've already spent way too much time on this seemingly simple task. Any suggestions?
|
|
| Author: | Lillian F-W [ Sun Apr 01, 2007 2:52 am ] |
| Post subject: | |
Steve, when I started looking at the plans with and eye for making it wider, I looked around at whats available for belts. I could find 18's and 25's easily and affordable. But I did find a couple of places that would make custom belts. I think I still have their urls if you want them. If you don't want to pay for a custom belt you may have to cut up a 25". |
|
| Author: | Rod True [ Sun Apr 01, 2007 4:02 am ] |
| Post subject: | |
Grizzly sells an 18"x48" for $28 for a single |
|
| Author: | Lillian F-W [ Sun Apr 01, 2007 6:09 am ] |
| Post subject: | |
Thanks Todd. I might just rethink the drum size. Couple more disks.... recut the base.... yeah this could work. |
|
| Author: | Lillian F-W [ Sun Apr 01, 2007 7:56 am ] |
| Post subject: | |
Ah, that doesn't sound too good. I think I'll just fire up autocad and see what I end up with. |
|
| Page 1 of 1 | All times are UTC - 5 hours |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|