| Official Luthiers Forum! http://w-ww.luthiersforum.com/forum/ |
|
| Finishing question http://w-ww.luthiersforum.com/forum/viewtopic.php?f=10102&t=1155 |
Page 1 of 1 |
| Author: | Colby Horton [ Sat Feb 26, 2005 6:46 am ] |
| Post subject: | |
I have just started the finishing process on my classic guitar. I’m using Targets USL and a sanding sealer under it. So far I have just sprayed several coats of sealer, the grain is already filled and all that. My question is how much sealer should be used? Should I get almost a complete level sand with the sealer or just enough to seal the wood and do all the leveling with the USL? |
|
| Page 1 of 1 | All times are UTC - 5 hours |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|