| Official Luthiers Forum! http://w-ww.luthiersforum.com/forum/ |
|
| Need a size - help http://w-ww.luthiersforum.com/forum/viewtopic.php?f=10102&t=11807 |
Page 1 of 1 |
| Author: | clavin [ Fri Apr 27, 2007 12:48 am ] |
| Post subject: | |
Hi Guys. Can someone tell me the size of the "Fender" Logo on old style pre-CBS strat headstock? How big is the word "Fender"-length, height, etc, and about how much room is there for a straight worded logo in general on the headstock in that area. I need to design a logo to fit that shape, and any info would help. I don't have a template Thanks. Craig L. www.handcraftinlay.com |
|
| Author: | KenH [ Fri Apr 27, 2007 1:32 am ] |
| Post subject: | |
I dont know if this will help or not, but I saw on e-bay a couple of listings for the fender decals for guitars. They had the older style and the newer styles available and the cost wasnt too much as I remember. You might want to check out ebay? |
|
| Author: | TonyKarol [ Fri Apr 27, 2007 1:42 am ] |
| Post subject: | |
62 re issue in my shop .... length - 1 3/4 F height 11/16 d height 9/16 other letters between 3/16 and 1/4 (first e) the whole fender stratocaster name on the decal is about 3 1/4, but at the end you get close to the B string tuner bushing |
|
| Author: | clavin [ Fri Apr 27, 2007 1:59 am ] |
| Post subject: | |
Your awesome! Craig L. |
|
| Page 1 of 1 | All times are UTC - 5 hours |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|