| Official Luthiers Forum! http://w-ww.luthiersforum.com/forum/ |
|
| Bending a cutaway http://w-ww.luthiersforum.com/forum/viewtopic.php?f=10102&t=11817 |
Page 1 of 1 |
| Author: | James W B [ Fri Apr 27, 2007 1:21 pm ] |
| Post subject: | |
I`m gonna try to bend a cutaway.The question is do I bend it to the main shape and then thin the horn area down to its final thickness and try to bend this part again to the cutaway shape.Or should I try to thin the horn area down before bending the main shape and then bend again to the cutaway shape.If I sound confused it`s because I am. James W B 
|
|
| Author: | tippie53 [ Fri Apr 27, 2007 2:43 pm ] |
| Post subject: | |
Check out http://www.bluescreekguitars.com/tutorial10.php this is my tutorial on bending . The machine is used to bend the cutaway and this should help you john |
|
| Author: | James W B [ Sat Apr 28, 2007 12:28 am ] |
| Post subject: | |
Todd thanks so much.why didn`t I think of that.You seem to always come thru. James 
|
|
| Author: | James W B [ Sat Apr 28, 2007 11:14 am ] |
| Post subject: | |
Got er bent,everythings cool. James |
|
| Page 1 of 1 | All times are UTC - 5 hours |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|