Official Luthiers Forum!

Owned and operated by Lance Kragenbrink
It is currently Thu Dec 12, 2024 4:43 pm


All times are UTC - 5 hours





Post new topic Reply to topic  [ 9 posts ] 
Author Message
 Post subject:
PostPosted: Sun Apr 29, 2007 3:08 am 
Offline
Brazilian Rosewood
Brazilian Rosewood

Joined: Sat Jun 17, 2006 3:48 am
Posts: 2094
Egg white as pore filler?

Does anyone these days use egg whites as pore filler, and what is the process?

I know most or all of you used pre-prepared pore filler, but I heard on the grapevine somewhere that some luthiers HAVE used egg white.

I am not expecting much of a response, I'm just curious.


Top
 Profile  
 
 Post subject:
PostPosted: Sun Apr 29, 2007 3:25 am 
Offline
Brazilian Rosewood
Brazilian Rosewood

Joined: Sat Jan 08, 2005 1:26 am
Posts: 2556
Location: United States
It's really good. It dries super hard and clear. One method is to put it on and then work it in with sandpaper so that some wood dust mixes in with it as it is pushed into the pores. Very effective and very solid. It's just a bit more time intensive than epoxy or oil based pore fillers.


Top
 Profile  
 
 Post subject:
PostPosted: Sun Apr 29, 2007 3:34 am 
Offline
Brazilian Rosewood
Brazilian Rosewood

Joined: Sat Jun 17, 2006 3:48 am
Posts: 2094
Thanks for the reply. Now I'm tempted to use the stuff, as I have now outspent my guitar spending budget for this month...

Now here's another wierd question...Is the stuff literally applied after being seperated from the yolk, or beaten to fluffly whites? <feels foolish for asking>


Top
 Profile  
 
 Post subject:
PostPosted: Sun Apr 29, 2007 4:09 am 
Offline
Koa
Koa

Joined: Wed Jun 01, 2005 6:35 am
Posts: 1325
Location: Kings Mtn., NC, USA
First name: Bill
Last Name: Greene
City: Kings Mountain
State: North Carolina
Zip/Postal Code: 28086
Country: USA
Focus: Build
Status: Amateur
Sam, I could be wrong, but I think there's a fairly good thread in the archives on this very topic. Or otherwise, I'm losing my mind...

_________________
Eagles may soar, but weasels don't get sucked into jet engines.


Top
 Profile  
 
 Post subject:
PostPosted: Sun Apr 29, 2007 4:47 am 
Offline
Koa
Koa

Joined: Fri Jun 30, 2006 4:23 pm
Posts: 1694
Location: United States
First name: Lillian
Last Name: Fuller-Watson
State: WA
Country: USA
Focus: Build
Status: Amateur
You're right Bill. We've talked about this relatively recently. And if my faulty memory serves, Colin is quite proficient at using egg whites as a pore filler.

_________________
Aoibeann


Top
 Profile  
 
 Post subject:
PostPosted: Sun Apr 29, 2007 4:57 am 
Offline
Brazilian Rosewood
Brazilian Rosewood

Joined: Sat Jan 08, 2005 1:26 am
Posts: 2556
Location: United States
I wouldn't whip them at all. I think that might trap air in the pores and make them white rather than clear. Test on scrap! Just as you said, seperate the yolk from the white and work it in using sandpaper. Work in small areas as it dries very quickly, and very hard.


Top
 Profile  
 
 Post subject:
PostPosted: Sun Apr 29, 2007 5:55 am 
Offline
Brazilian Rosewood
Brazilian Rosewood

Joined: Sat Jun 17, 2006 3:48 am
Posts: 2094


I did check the archives, there are a few discussions, but there was no "how to". I managed to glean the handy information that it tends to dry fast.

Thanks Paul, I was never good at making meringues!!!


Top
 Profile  
 
 Post subject:
PostPosted: Sun Apr 29, 2007 9:57 am 
Offline
Brazilian Rosewood
Brazilian Rosewood
User avatar

Joined: Sun Dec 25, 2005 7:58 pm
Posts: 2946
Location: United States
    I've heard that you add onions, peppers and cheese and it's works outstanding!

   As I've understood it they are just pressed dryed and sanded like the credit card/epoxy method, but Paul's method sound like a good idea too, even though I've never used them. If you use egg whites Sam, I'd be curious how it works.

_________________
Billy Dean Thomas
Covina, CA

"Multi famam, conscientiam, pauci verentur."
(Many fear their reputation, few their conscience)


Top
 Profile  
 
 Post subject:
PostPosted: Sun Apr 29, 2007 10:09 am 
Offline
Contributing Member
Contributing Member
User avatar

Joined: Mon Mar 19, 2007 7:05 am
Posts: 9191
Location: United States
First name: Waddy
Last Name: Thomson
City: Charlotte
State: NC
Focus: Build
Status: Semi-pro

I have actually seen lutes that were completely finished with egg whites.  They looked great - not shiney, but great.  That is not, I repeat, NOT, a recommendation.


_________________
Waddy

Photobucket Build Album Library

Sound Clips of most of my guitars


Top
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 9 posts ] 

All times are UTC - 5 hours


Who is online

Users browsing this forum: No registered users and 29 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Jump to:  
Powered by phpBB® Forum Software © phpBB Group
phpBB customization services by 2by2host.com