| Official Luthiers Forum! http://w-ww.luthiersforum.com/forum/ |
|
| seven string classical http://w-ww.luthiersforum.com/forum/viewtopic.php?f=10102&t=11891 |
Page 1 of 1 |
| Author: | tgroppi [ Thu May 03, 2007 2:30 pm ] |
| Post subject: | |
Hello all I have decided to built a seven string classical guitar. I was wondering if anyone has built one ? should i go with 650 mm scale ? The rosette should be 87mm or wider ? Fretboard width ? Thanks a bunch in advance Best Thomas |
|
| Author: | LuthierSupplier [ Fri May 04, 2007 3:03 am ] |
| Post subject: | |
Thomas, Not sure you are aware of this, but I have a neck template that I sell for unusual necks. I have a 7 string model that was built by Edward Victor Dick. On the template is the contour shapes in 2 locations, the bridge string spacing, the nut string spacing, width at nut and last fret, and lots more information. I think this would be perfect for what you are doing. You can find it under the classical section on THIS page. Hope this helps. Regards, Tracy |
|
| Author: | tgroppi [ Fri May 04, 2007 4:52 am ] |
| Post subject: | |
Thanks Tracy, Great Can you please email a paypal invoice with correct shipping (Vancouver, B.C Canada) for : 1968 Antonio Marin Flamenco Item #C51.7 2005 EVD 7 String Item #C58.0 My email is tgroppi@usa.net Best Thomas |
|
| Author: | LuthierSupplier [ Fri May 04, 2007 7:40 am ] |
| Post subject: | |
Absolutely! Done! Thanks. Tracy |
|
| Page 1 of 1 | All times are UTC - 5 hours |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|