| Official Luthiers Forum! http://w-ww.luthiersforum.com/forum/ |
|
| Zpoxy under nitro - cure time? http://w-ww.luthiersforum.com/forum/viewtopic.php?f=10102&t=11912 |
Page 1 of 1 |
| Author: | Jim Kirby [ Sun May 06, 2007 5:25 am ] |
| Post subject: | |
I've looked in the archive but can't find the answer to the question "how long do you let Zpoxy cure before spraying nitro over it?" I'm doing my first Zpoxy fills right now. A Tele is going to get nitro, and a rosewood OM is going to get FP'ed. |
|
| Author: | John How [ Sun May 06, 2007 6:19 am ] |
| Post subject: | |
I'd give a day or two at least. Probably by the time it's dry enough to get a good fine finish sand, it's cured enough to finish. |
|
| Author: | Martin Turner [ Sun May 06, 2007 10:00 am ] |
| Post subject: | |
A couple of days would be plenty. |
|
| Page 1 of 1 | All times are UTC - 5 hours |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|