| Official Luthiers Forum! http://w-ww.luthiersforum.com/forum/ |
|
| piezo under saddle pup question....... http://w-ww.luthiersforum.com/forum/viewtopic.php?f=10102&t=11955 |
Page 1 of 1 |
| Author: | martinedwards [ Wed May 09, 2007 9:21 am ] |
| Post subject: | |
I have a bass and a mando nearing completion. can I fit a standard acoustic guitar piezo under a bone saddle o these, or do I have to get the specific bass & mando piezos? anyone done it? thanks!! |
|
| Author: | TonyKarol [ Wed May 09, 2007 9:38 am ] |
| Post subject: | |
It will depend on two things Martin - how long is the saddle slot, and which type of piezo you use. Most of the hard crystal styles (Fishman matrix, KK piezo)likely wont fit a mando (maybe the bass??), as the slot needs to be at least 2 inches long - thats about the avg length of that type. If you go the cable type route though, you can make it work on about anything - these would be like a Baggs Element or DTAR Timberline type. |
|
| Page 1 of 1 | All times are UTC - 5 hours |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|