Official Luthiers Forum!
http://w-ww.luthiersforum.com/forum/

MY Necks and Rosettes are in
http://w-ww.luthiersforum.com/forum/viewtopic.php?f=10102&t=12038		 Page 1 of 1
Author:  WaddyThomson [ Tue May 15, 2007 1:17 am ]
Post subject: 
I have some 25 year old bandsawn H. Mahogany, 12 fret necks.  Here are pics of 4 I will put up at $30 each, or would consider trades for top wood, preferably spruce(other than sitka).  I think I can take pay-pal.  I can pay that way so I assume i can receive that way.


Dimensions are min. 3 5/8 at heel, 1" thick at head, 15* slope, 2 11/16 wide, 13 1/8 to break at head.  It's close, but big enough for a classical neck if you add some wings and a foot piece.



Also, for your enjoyment and for sale, the OLYMPIC ROSETTES!



These are Japanese Rosettes, also 25 years old.  They are large for a larger body classical guitar.  Size OD = 148 mm / 5 3/16, ID =106mm / 4 1/8  band is 22mm / 7/8, made in Japan.  $5.00 each.


Thanks for looking.  Just starting out, so don't have much accumulated yet.
Author:  Peter J [ Tue May 15, 2007 2:25 am ]
Post subject: 
Waddy,

I'll take two of the rosettes. I'll send you a PM with my address so you can tell me what the total will be including shipping.

Cheers,

Peter
Author:  WaddyThomson [ Tue May 15, 2007 2:33 am ]
Post subject: 
You got em Peter.  I'll PM you with the total, but I can't imagine shipping will be bad, but I'll figure it out.
Author:  WaddyThomson [ Tue May 15, 2007 3:33 am ]
Post subject: 
fI'll take a look Chris & get back to you.  As for the neck, do you have a preference, they are numbered in pic 2.
Author:  Jim Kirby [ Tue May 15, 2007 3:33 am ]
Post subject: 
Waddy - 2 rosettes for me too, please. See PM.

Jim Kirby



Author:  WaddyThomson [ Tue May 15, 2007 3:35 am ]
Post subject: 
O K Jim.  You got em.  I'll look for your PM, and get back to you after I figure out the shipping.  It shouldn't be much, if I send them Priority Mail.
Author:  Shane Neifer [ Tue May 15, 2007 3:45 am ]
Post subject: 
Waddy if you are interested I will trade you 2 3A Lutz sets for the other three necks. I am planning on some 12 fretters and a guy can never have too many neck blanks!

Shane
Author:  robertD [ Tue May 15, 2007 6:24 am ]
Post subject: 
Hey Waddy,

I'll take the last rosette, let me know what the shipping cost too!

Robert
Author:  WaddyThomson [ Tue May 15, 2007 6:38 am ]
Post subject: 

[QUOTE=robertandsons]Hey Waddy,



I'll take the last rosette, let me know what the shipping cost too!



Robert[/QUOTE]

You got it Robert. PM me with your address and Zip.  Just in case I don't have it.
Author:  WaddyThomson [ Tue May 15, 2007 7:51 am ]
Post subject: 

[QUOTE=Shane Neifer]Waddy if you are interested I will trade you 2 3A Lutz sets for the other three necks. I am planning on some 12 fretters and a guy can never have too many neck blanks!



Shane[/QUOTE]

Shane:

Don't know how I missed your message, but you have deal, if I'm not too late.
Author:  WaddyThomson [ Tue May 15, 2007 7:58 am ]
Post subject: 
Hey Guys, looks like I'm sold out.  I might find another neck and or rosette if anyone is dying for one.  I have some of each left.
Author:  WaddyThomson [ Tue May 15, 2007 8:13 am ]
Post subject: 
OOPS - I'm back in business.  Still have two of the Rosettes.  The posted size is an error.  It reads 5 3/16 and it should have been 5 13/16 or 148 mm.  The price hasn't changed - it is, after all, a bargain price for hand-made all wood Rosettes, even if they are big.
Author:  WaddyThomson [ Wed May 16, 2007 7:35 am ]
Post subject: 
I have a HOCK Chip Breaker for a 1 3/4" plane iron. It is brand new.  Still in the wrapper.  Found out it will probably not work in my wooden plane that I bought it for.  Too thick.  I could probably send it back, but I would just as soon sell it. $20.00 plus shipping.

Still have 2 Rosettes if anyone is interested.
Author:  Jim Kirby [ Fri May 18, 2007 10:20 pm ]
Post subject: 
Waddy - Got the rosettes and the bonus CD !?! Can't wait to give it a listen. Thanks very much.

Jim

Author:  WaddyThomson [ Sat May 19, 2007 12:25 am ]
Post subject: 
Thanks Jim.  Just a little promotional material.
Page 1 of 1 All times are UTC - 5 hours
Powered by phpBB® Forum Software © phpBB Group
http://www.phpbb.com/