Official Luthiers Forum!
http://w-ww.luthiersforum.com/forum/

Steve’s Stuff!
http://w-ww.luthiersforum.com/forum/viewtopic.php?f=10102&t=12060		 Page 1 of 2
Author:  Steve Saville [ Tue May 15, 2007 5:29 pm ]
Post subject: 
Figured mahogany. I paid $150 for this nice set. $125 shipped.



Peterson tuner, VS-1 with TP-1 Tuning Pick up. $125 shipped.



LMI part # WNCDMT M/T neck with inserts and Neck block. LMI price $160 for both. It does have a dent shown in the picture. $100 shipped.




Veritas honing guide, well used. $20 shipped.



Ibex Violin plane - LMI part #PLI30, LMI Price $41.65 $25.00 Shipped This plane has seen almost no use, less than 5 minutes.



Dremel Router base, $15 shipped


LMI Hide glue FGH, LMI price $10.45. This has not been opened as you can see the plastic wrap is still on it. $10 shipped.


Taylor Chrome Tuners - $25 shipped


Stanley plane No 120, complete, fair shape. $20 shipped


U-POL HVLP Sprayer, 1.0 mm nozzle. This is a nice high quality sprayer. I paid $120 for it. Lightly used, about 5 times - $60 shipped.



I also have LMI mahogany neck blank LMI #WNHMH1 Honduran Mahogany, makes two (2) necks, 30x4x3. LMI price $95.55. $70 shipped. It has a few dents on one side but shouldn't be a problem.


I would like to trade for some wood - Back and side sets. Make offers!
Author:  Shawn [ Tue May 15, 2007 5:40 pm ]
Post subject: 
Steve,

I will take the Peterson VS-1 for $125. I will PM you.
Author:  Lillian F-W [ Tue May 15, 2007 10:59 pm ]
Post subject: 
Steve, I'm out the door to work, but I'll take the Stanley and PM you later.
Author:  nathan c [ Tue May 15, 2007 11:03 pm ]
Post subject: 
Steve, I'll take the IBEX plane please.
Author:  KenH [ Wed May 16, 2007 2:41 am ]
Post subject: 
I'll take the dremel router base.
Author:  Steve Saville [ Wed May 16, 2007 3:04 am ]
Post subject: 
Shawn, Lilia, Nathan, and Hilliard - You got it.

Let me know if you want to send a check or use Paypal.
If paypal, please let me know if you address from paypal is where you want me to ship to. Paypal at slsaville@hotmail.com
If check, Pm me and I'll give you me address.
Author:  Shawn [ Wed May 16, 2007 3:20 am ]
Post subject: 
I paypal'ed you and my shipping address is the same as my paypal address.

Thanks again,
Shawn
Author:  nathan c [ Wed May 16, 2007 3:51 am ]
Post subject: 
I'll paypal when I get home from work.
Author:  KenH [ Wed May 16, 2007 4:33 am ]
Post subject: 

I paypal'd you with the $15 for the dremel router base.


Thanks,


Ken
Author:  Lillian F-W [ Wed May 16, 2007 3:40 pm ]
Post subject: 
Didn't forget you Steve. I just got home. Paid by Paypal.
Author:  Steve Saville [ Wed May 16, 2007 5:21 pm ]
Post subject: 
Ken, Lillian, and Shawn - Payment received. Thanks. I will ship Saturday.

Nathan - Were you going to Papal? I have not seen anything, please let me know if you paid and I missed it, Thanks.
Author:  Steve Saville [ Wed May 16, 2007 5:27 pm ]
Post subject: 
Here are some books in very good condition. Make an offer -





Has all the drawings/plans.





Author:  Kim [ Wed May 16, 2007 8:43 pm ]
Post subject: 
Hi Steve,

Will you take $20 each for the big red and the art of inlay ??

Cheers

Kim
Author:  Steve Saville [ Thu May 17, 2007 1:44 am ]
Post subject: 
Kim,
Sorry, someone beat you to the Big Red Book via PM.

Do you want the Art of Inlay?
Author:  Kim [ Thu May 17, 2007 1:49 am ]
Post subject: 
OK, I'll PM you my address Steve, if you can just get a shipping cost for air parcel post (not express or priority as there is no hurry) I will square up with Paypal.

Cheers and thanks

Kim
Author:  Brock Poling [ Thu May 17, 2007 7:10 am ]
Post subject: 

I will take the Jim Williams book if it is still available.

Let me know how much....

Author:  Jim Kirby [ Thu May 17, 2007 9:06 am ]
Post subject: 
Steve - Thanks for the PM of the pictures of the 3 by 4 neck blank. If you are reasonably certain that an electric archtop guitar neck would not overlap that ding on the one corner, I'll take it!

(after all, James Orr's 575 needs a new neck! This will really end up being an OLF guitar for sure.)

Jim

Author:  Steve Saville [ Thu May 17, 2007 10:02 am ]
Post subject: 
Jim,
I can't be sure of that, so perhaps it is best just keep it.
Author:  Jim Kirby [ Fri May 18, 2007 12:18 pm ]
Post subject: 
Steve - OK, thanks. I think I'll be heading into the woodpile to look for some stuff to laminate.

Jim

Author:  Steve Saville [ Mon May 21, 2007 2:39 am ]
Post subject: 
Update on available items -

LMI part # WNCDMT M/T neck with inserts and Neck block. LMI price $160 for both. It does have a dent shown in the picture. $80 shipped.




Veritas honing guide, well used but works great. $20 shipped.


LMI Hide glue FGH, LMI price $10.45. This has not been opened as you can see the plastic wrap is still on it. $10 shipped.


Taylor Chrome Tuners - $25 shipped


U-POL HVLP Sprayer, 1.0 mm nozzle. This is a nice high quality sprayer. I paid $120 for it. Lightly used, about 5 times - $60 shipped.



This is a great book on finishing - Lots of great information - $20 shipped


$20 shipped.

Author:  fryovanni [ Mon May 21, 2007 2:56 am ]
Post subject: 
Steve,

    Would you take $100 for the tuners,HHG,Spray Gun, and Handbook?

Peace,Rich
Author:  Steve Saville [ Mon May 21, 2007 3:19 am ]
Post subject: 
Rich,
Sorry - someone beat you to the sprayer via PM. Everything else is still available.
Author:  fryovanni [ Mon May 21, 2007 3:25 am ]
Post subject: 
Steve, That is cool. I will take the other items at your asking price.

Peace,Rich
Author:  Steve Saville [ Mon May 21, 2007 5:29 pm ]
Post subject: 
I learned a lot from these DVDs. It is time to stop hoarding them and let someone else learn from John.

For a description go here.

I'd like these to go to someone that couldn't afford to buy them from John and/or was not considering buying them.

I have most. Make offers. I think 50% of retail plus $5.00 shipping would do.

Necks, Parts One and Two ($35 retail)


Voicing 1&2 (Retail $35)


Advanced Voicing    (Retail $35)


Side Bending (Retail $20)


Tops and Backs   (Retail $20)


Rims        (Retail $20)


Bridge Making(Retail $35)


Binding(Retail $35)


Neck Setting and Double Mortise and Tenon Neck Joint (Retail $35)





Author:  Kim [ Mon May 21, 2007 5:35 pm ]
Post subject: 
I'll tak'em Steve
Cheers

Kim
Page 1 of 2 All times are UTC - 5 hours
Powered by phpBB® Forum Software © phpBB Group
http://www.phpbb.com/