Official Luthiers Forum!
http://w-ww.luthiersforum.com/forum/

Martin neck needed !!!
http://w-ww.luthiersforum.com/forum/viewtopic.php?f=10102&t=12129		 Page 1 of 1
Author:  WalterK [ Mon May 21, 2007 4:23 am ]
Post subject: 
HELLO FRIENDS!!
Does anyone have a used Martin 6 string neck?
I desperately need a neck in good condition.
I prefer a 1 3/4" width at the nut, but will take a 1 11/16". The Martin Logo is not needed.
A mortise and Tenon is a must, bolt on neck!!

Please help me out if you can.
Thanks,

walterK
Author:  psl53 [ Mon May 21, 2007 4:31 am ]
Post subject: 

walter,


I was looking on e-bay for a damaged martin and came across a D-18 neck. Wasn't interested, so I did look too hard. You may want to serch e-bay for Matrin Guitar and see what comes up.


Peter
Author:  redennis3 [ Mon May 21, 2007 4:48 am ]
Post subject: 

Hi Walter, I've got one I'll part with, it looks like its about 1 3/4 at the nut, I could be wrong



 it is mortice and tenon,


                                        Red
Author:  redennis3 [ Mon May 21, 2007 4:50 am ]
Post subject: 

Nope just checked, it is 1 3/4, but you wanted a used one, this one is new, does it matter? If I can help let me know.


                                      Red
Author:  Steve Saville [ Mon May 21, 2007 5:11 am ]
Post subject: 
Walter,
I have this posted in the OLF auction. Is that what you are looking for?
LMI part # WNCDMT M/T neck with inserts and Neck block.

If so, PM me.
Author:  WaddyThomson [ Mon May 21, 2007 5:56 am ]
Post subject: 
Didn't someone have a bunch of Martin necks on the SWAP MEET?
They may have all been sold, or the wrong type.
Author:  WalterK [ Mon May 21, 2007 10:06 am ]
Post subject: 
Hi Red,

New or used it doesn't matter!!
let me know what you would like for it.
Thanks,

walter
Author:  Shawn [ Mon May 21, 2007 12:06 pm ]
Post subject: 
Walter,

I have a Martin neck like the one Red has shown above. It is 1 3/4 but with no diamond volute as in the other batch of swap. It has the Martin neck block, threaded insert and bolt. It has EIR as the headstock veneer.

Someone gave it to me with a bunch of other stuff but I do not build Steel Strings (unless forced).

If you want it, it is yours for free...just tell me your address...if we are giving things away in swap deals, this is a deal...no strings attached (no pun intended).
Author:  WaddyThomson [ Mon May 21, 2007 12:44 pm ]
Post subject: 
You are a Prince, Shane!
But we already knew that.
Page 1 of 1 All times are UTC - 5 hours
Powered by phpBB® Forum Software © phpBB Group
http://www.phpbb.com/