| Official Luthiers Forum! http://w-ww.luthiersforum.com/forum/ |
|
| HRW thickness? http://w-ww.luthiersforum.com/forum/viewtopic.php?f=10102&t=12163 |
Page 1 of 1 |
| Author: | Cecil [ Wed May 23, 2007 9:44 pm ] |
| Post subject: | |
I have a set of HRW that I bought from Hibdon Hardwoods about three years ago. Boy is this stuff hard and stiff. My feeling is that I could probably go a lot thiner with this wood than say ERW.I'm thinking .075-.085 on the sides and around .090-.1 for the back. Those of you who have worked with it, what has been your experience? TIA, Cecil |
|
| Author: | Cecil [ Thu May 24, 2007 10:44 pm ] |
| Post subject: | |
Thanks Hesh, thats about what I had in mind. I just wanted to check. I am really looking forward to using this wood. The tap tone is fantastic. Visually it is a little pedestrian but I'm looking foward to a great sounding guitar(provided the luthier does'nt scerew it up) 
Cecil |
|
| Page 1 of 1 | All times are UTC - 5 hours |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|