Official Luthiers Forum!
http://w-ww.luthiersforum.com/forum/

Most rewarding part of build
http://w-ww.luthiersforum.com/forum/viewtopic.php?f=10102&t=12226		 Page 1 of 2
Author:  James W B [ Tue May 29, 2007 9:16 am ]
Post subject: 
I thought it might be fun to talk about the most rewarding part of building a guitar.Especially from some of the seasoned vets on the forum.I`m not sure if this has been discussed before, if it has it would have been before I was around.I`m not talking about the obvious, when a guitar is strung up and played for the first time.I was thinking about during the process.
     Anyway for me there`s no doubt that it is carving the neck.I`m no expert by any means since I have just finished my second neck.I just really seem to get off on this part of the build.I guess it`s because I`m old ,dumb ,and blind, and I can`t believe that I can even get them carved half way decent.So for me, this is the most rewarding and funnest part of the build.I`d love to hear what floats your boat and why?         &n bsp; James W B
Author:  old man [ Tue May 29, 2007 9:32 am ]
Post subject: 
I agree with you. Carving the neck is a real pleasure for me. Makes me feel like a sculptor. I've finished carving 4 completely and halfway through another. I'm getting much better at it. Closing the box is probably the second most satisfying.

Ron
Author:  Pwoolson [ Tue May 29, 2007 9:41 am ]
Post subject: 
For me this is the most rewarding part of building.
Author:  Ray Pepalis [ Tue May 29, 2007 9:42 am ]
Post subject: 
I'm a first time builder, and carving the classical heel was a frightening challenge. Well, it came out OK, so then side bending was scary, so I built a side bender and it came out OK. Closing the "box was the next challenge, and it came out OK. I am now in the process of binding, so I built a routing jig, and it is coming out OK too. I've learned a lot about myself in the process.

Ray
Author:  LuthierSupplier [ Tue May 29, 2007 9:49 am ]
Post subject: 
I actually like carving the top and back braces. To me it is the most relaxing part of the build. It is a slow process that allows you to reflect and listen to the wood as you carve.
Tracy
Author:  James Orr [ Tue May 29, 2007 10:04 am ]
Post subject: 
If I can manage to fill three gaps to the point that they're level without
looking like they're filled with some sort of goop, I will consider that an
extremely rewarding moment
Author:  j.Brown [ Tue May 29, 2007 10:43 am ]
Post subject: 
The most rewarding part for me is playing a completed guitar.

There are a lot of "Most" moments during the builds. Most frustrating, irritating, humbling, hair-raising, gruesome, annoying, tedious, frightening, gut-wrenching, etc...but I sure do like it when its D O N E!

-j.
Author:  James W B [ Tue May 29, 2007 10:53 am ]
Post subject: 
Hesh it`s intersesting that you said you felt sad when your favorite part was over,I`ve had that same feeling.And of course J. when it`s done it is definately glorious.And Hesh you are truly not an idiot.Anyone who pursues this endeavor and succeeds the way you and many others on this forum have is a very special person in my mind.
                James



Author:  Michael Lloyd [ Tue May 29, 2007 11:28 am ]
Post subject: 
Once I've set the neck, it's free sailing from there. However, I get great joy when I can hand it to someone to play and just listen.
Author:  Rod True [ Tue May 29, 2007 12:00 pm ]
Post subject: 
Most of you will call me weird or strange or something else, but......

I actually really enjoy binding the body. It is one of the most challenging parts of building a guitar. It's an area that is noticed if it's not up to snuff and I just really enjoy seeing a good binding job. It's the most satisfying & annoying part of the body work for me. If it turns out it's satisfying, if not well......
Author:  Bill Greene [ Tue May 29, 2007 12:05 pm ]
Post subject: 
I just got my second guitar in the white, and I have to say I've enjoyed every bit of it so far. It's been nerve wracking at times (and I haven't fretted it yet) but it's all been very nice.

Now for finishing...which I'm anticipating isn't going to be all that much fun. My first was sent to Tony F., but I'm going to attempt this one with a buddy/teacher friend of mine. They say you gotta do at least one, before you really appreciate Tony, right?   
Author:  KenH [ Tue May 29, 2007 12:17 pm ]
Post subject: 

Not mentioning hearing the voice on the guitar for the first time, I guess closing the box is the most rewarding for me. Knowing the work that went into the box and the tone I expect it to have is exciting for me.


I think the least favorite part of the build is fitting the neck.
Author:  SimonF [ Tue May 29, 2007 12:22 pm ]
Post subject: 
My favorite part is sending a guitar out for finishing - because I hate
finishing

Although there is a certain satisfaction that comes from French Polishing
an instrument - but I always hated spraying a finish. So thank God for
folks like Tony and Addam.

Author:  Mark Maquillan [ Tue May 29, 2007 12:50 pm ]
Post subject: 

This is my third guitar and the first for carving and tap tuning the top. That was enjoyable like Tracy said, relaxing. I really like finishing also. Who are Tony and Addam? Why would you send out a guitar for someone else to finish?


 


Mark
Author:  davidmor [ Tue May 29, 2007 1:02 pm ]
Post subject: 
For me it is carving the neck.  I find it amazing that I can take blocks of wood and turn them into a nice feeling and looking guitar neck.  A very close second is inlay work.  Although my stuff is relatively simple, it is extremely enjoyable work.
Author:  SimonF [ Tue May 29, 2007 1:06 pm ]
Post subject: 
Mark,
Tony Ferguson and Addam Stark are professional finishers for the lutherie
community. When you are selling your guitars and you have a reputation
to uphold, your finishes have to be perfect. And a perfect finish can be
very time consuming especially if you aren't set up for it. For example,
when spraying lacquer it really helps to have a clean room so dust won't
settle in between coats. Also, lacquer and the urethane finishes are
dangerous to work with - and water based finishes just aren't up to the
same standards.

I have a lacquer finish done for me by Addam Stark and his work is
flawless. There is no way with my small workshop that I would be able to
make the amount of guitars I need to and do a perfect lacquer finish - all
at the same time and in the same place. It just isn't practical or
financially valid. And there are a number of full-time and hobby luthiers
that are in a similar position as I am. In fact, a good percentage of well-
known luthiers are having their finishes outsourced because they can
become more profitable by doing so. The only finish I do myself is a
French Polish which is much more appropriate with my given resources.

Peace Out,
Simon
Author:  Dave Anderson [ Tue May 29, 2007 1:41 pm ]
Post subject: 
I Do enjoy finishing my guitars.I just really get into laying down a nice wet coat of lacquer without runs. And rubbing it out and buffing that beautiful shine back .Very rewarding.
Also,the carving of the top and back braces is a joy for me.
Author:  burbank [ Tue May 29, 2007 1:48 pm ]
Post subject: 
I haven't carved a neck yet, but I do like carving the braces a whole lot. I find it very relaxing. Also, after it's strung up, finally getting to play and hear is great, but I also like that moment when you know the setup is right. You play up the neck and the fretwork is right. The sound is clean all over the neck.
Author:  Andy Zimmerman [ Tue May 29, 2007 3:06 pm ]
Post subject: 
There is nothing like hearing the first note!!!!!
In the building, I like bending the sides!!!!
Author:  Sam Price [ Tue May 29, 2007 7:16 pm ]
Post subject: 
Well...*takes a deep breath*

It is apparent to my husband, family and friends that guitar building is becoming more important to me...

Every aspect of the build is still VERY much a novelty to me, from searching on the web for good deals on tonewood (I have a growing family to feed!!), to communicating with other luthiers, from jointing to having the finished instrument in my hands, being a guitarist for 18 years.

Even the conception of the design in my mind's eye is an enjoyable process, sketching out the design, making plans and standing back in total awe as the instrument physically takes shape.

Surely nobody would dispute that is an amazing part of the build process too!!!

My guitar building hobby has been the fruition of too many years of intense creative frustration, using my lifelong artistic training to engage myself in a wide range of creative activities.

I now feel a great sense of fulfilment and identity in what I am doing, and it has been a real gamble. Whether or not I make a "career" out of it, I don't know. I am just enjoying every moment of what I do, and am looking forward as to seeing where this current path will take me.
Author:  Arnt Rian [ Tue May 29, 2007 7:42 pm ]
Post subject: 
It seems many enjoy the steps that involve sharp tools, and when you see pictures of The Luthier on web sites and in books you often see him concentrating with a shiny chisel or a plane with shavings scattered nicely about… The truth is most of us probably spend more time with big power tools, rotary hand tools, abrasives and super glue, but where is the romance in that?

Me, I like most steps involved in the building process. I don’t particularly enjoy building molds and jigs, and the planning and drafting stage is a bit too much like my day job to all that satisfying. Of course finishing can be tedious, but putting that first coat of a clear finish over the body and seeing all the colors come alive can be pretty exciting too…
Author:  Sam Price [ Tue May 29, 2007 9:15 pm ]
Post subject: 
I am one the the sadistic sickos who can be seen concentrating with a shiny chisel with shavings scattered nicely (or otherwise) about...

But then I am a vegetarian left-handed guitar player, so that might explain things a bit...
Author:  Mattia Valente [ Tue May 29, 2007 9:17 pm ]
Post subject: 
Pet hate: building tools and molds. I enjoy making a good one that looks nice, but only because I enjoy using a nice tool/mold/jig for a job. Finishing is fun at the very beginning (First coat) and the very end (when you're finished), but finish-sanding is a chore.

Biggest freaky/satisfying moment is tuning up for the first time, hearing things creak and pop a little as all that string tension gets applied, but what I really enjoy most is the process of building, all the little steps, the attention to each detail.

Neck carving is very zen, very pleasurable, ditto brace carving. Jointing is great fun if it's going well, side bending is oddly satisfying and a bit of a thrill (probably because I don't have proper temp control yet, so it's cycling on and off and on and off and bending and...). Closing the box, another great moment, fitting the rosette and having it all line up. Mostly, anything involving shaping, curving, etc. is great fun, and I do really enjoy the design process quite a bit (which is nothing like my day job).

Also, routing with a good router and a solid bit has it's own high-speed charm to it. It's not only hand-pushed edge tools ;)
Page 1 of 2 All times are UTC - 5 hours
Powered by phpBB® Forum Software © phpBB Group
http://www.phpbb.com/