Official Luthiers Forum!
http://w-ww.luthiersforum.com/forum/

whats on your bench?
http://w-ww.luthiersforum.com/forum/viewtopic.php?f=10102&t=12323		 Page 1 of 3
Author:  peterm [ Mon Jun 04, 2007 3:09 am ]
Post subject: 
I think it would be cool to see a nice line up of guitars....
Lets see what you guys have brewing!

Author:  martinedwards [ Mon Jun 04, 2007 3:18 am ]
Post subject: 
those are awful perty!!!

right now I'm working on a spruce/walnut cutaway mini jumbo which will be a "pay it forward" gift to some kid



and a cutaway mandonaught (walnut/spruce again)

Author:  clavin [ Mon Jun 04, 2007 4:22 am ]
Post subject: 
bench, so..

My sister-in-Law from the Phillipines is getting her American citizenship this flag day (that's when the "swearing in-type" event is planned).
We go to Disney often with them and she's a HUGE Daisy Duck fan- she literally seeks her out at the parks for photos, and needless to say her collection Daisy related things is pretty big. So I made this broach for her as a citizenship gift. "American Daisy"
Materials are diamonds, lapis, pearl, white river pearl, pink mussel, gold pearl, turquoise, coral, casien coral, and ebony all backed on a piece of sterling silver (like Larry R. does the fancy rosette art on the million Martin- the shell is backed to silver and re-cut around it) with a bit of engraving for the detail.
Inlay is fun but honestly I really think this came out cool. It's the same steps as inlay but backed instead of inset. I also surrounded the sides with blue tinted epoxy to give it a finished look. I still need to clean up the right side eye-lashes a bit, they need some leveling and sanding as they were installed over the silver after everything else.
More fish soon I promise. Oh- if you guys want things like this as gifts of course I can do this for you all too. I need to add a space to my site for this "new" jewelry category of work.

Now back to your guitar related stuff- wait- this IS guitar related really...

Craig L

Author:  Billy T [ Mon Jun 04, 2007 4:35 am ]
Post subject: 
Wow! That's nice work Craig!
Author:  Jim Kirby [ Mon Jun 04, 2007 5:41 am ]
Post subject: 
This weekend I glued and leveled the fretboard and rough-carved the neck for classical #2. This is the Rodriguez design like my first, but WRC and Indian RW this time instead of Sitka and Indian RW.



Author:  Michael Dale Payne [ Mon Jun 04, 2007 5:51 am ]
Post subject: 
I have a Malaysian Ebony Classical that got put off due to my accident on the bench. A Curly Narra Jumbo and a Curly Narra Dreadnought coming up behind it A Claro Walnut SJ Cutaway after them and two more orders that are unsettled on back and side wood.

But to honestly answer the question I have a mess on the bench right now. I did not clean the shop this weekend
Author:  Sam Price [ Mon Jun 04, 2007 6:37 am ]
Post subject: 
A load of mess...I've finished my cittern, and am planning to make another MDF mold for build #3 & 4, an Myrtle/Englemann OM, and an Ovangkol/Englemann rightie OM
Author:  drfuzz [ Mon Jun 04, 2007 7:31 am ]
Post subject: 
As the shop rebuild sloooooowly progresses, my bench has a bunch of tools and boxes of stuff that I am <finally> starting to figure out places for. At least now I have places to put things

By the time I get the shop done, it will be time to start building a guitar for the other stepdaughter - a present for surviving 4 years in the Marines
Author:  Bill Greene [ Mon Jun 04, 2007 9:01 am ]
Post subject: 
Jim, I really like the way you carried the backstrip inlay through the binding onto the heel plate...maybe that's typical of classicals, but I haven't seen it before, and it's nice.

Love to see a closeup of that if you have one.

Bill
Author:  James Orr [ Mon Jun 04, 2007 10:00 am ]
Post subject: 
They're just drawings right now, but I've been trying to get a Fender
tweed deluxe circuit on one side of an amp, and a two-rock (modified
blackface) circuit on the other. They work with the signal differently, so
it's a challenge.

Also have a new electric nearing finish.

And my acoustic just waiting for a bit of gap-filling.
Author:  Jim Kirby [ Mon Jun 04, 2007 10:27 am ]
Post subject: 
[QUOTE=Bill Greene] Jim, I really like the way you carried the backstrip inlay through the binding onto the heel plate...maybe that's typical of classicals, but I haven't seen it before, and it's nice.

Love to see a closeup of that if you have one.

Bill
[/QUOTE]

Bill - Thanks! I wouldn't say it's typical of classicals, but it's certainly not uncommon.

I've attached two pictures, and was having a lot of trouble with flash on them, but you can see my general style ("My style", he says ... in the absence of an imaginative solution of my own, this represents a successful ripoff) As you can see, I'm still struggling with the pointy ends of the binding where it is inlaid into the heel.

The classical guitar now has it's first coat of Zpoxy for grain filling.



Author:  SniderMike [ Mon Jun 04, 2007 10:57 am ]
Post subject: 
I just posted this in another thread, but I'll post it again fer kicks:



This has been on my bench for a looooong time.
Author:  Michael McBroom [ Mon Jun 04, 2007 11:42 am ]
Post subject: 
Yeah, here's one I wish would just go away! I am so tired of working on this guitar. I've been a couple of days away from finishing it for a few weeks now. It never ends. Have I mentioned lately how much I hate to french polish?



Best,

Michael
Author:  KenH [ Mon Jun 04, 2007 11:49 am ]
Post subject: 

Just finished this one... hopefully it sorta looks like a Les Paul. Shure does have a nice mello tone with those humbuckers



 


As far as the bench is concerned, #11 is awaiting some finish and is sitting there  behind #12, which just got the back glued on this afternoon.



 


If you look real close, you can see the next 8 or so guitars waiting in line to be made.



 


Here is a little side project I have been working on. A cedar chest made out of cedar of lebanon. It got it's first coat of varnish this afternoon also.
Author:  Chansen [ Mon Jun 04, 2007 1:34 pm ]
Post subject: 
Well even though I just posted pics of my first rosette.... here are some pics with the body outlined. The cutaway may be a bit ambitious for my first go. Depending on how the treble side bends, I will make the final call if this guitar does in fact have a cut away. Picture number one is me doing a little photoshop so that I can see the body better - photo two is the same pic, only unadulterated.



 
Author:  KMartin [ Mon Jun 04, 2007 1:46 pm ]
Post subject: 





...Newb humor...
Author:  LuthierSupplier [ Mon Jun 04, 2007 3:22 pm ]
Post subject: 
Wow, I'm impressed at some of the beautiful things you all are building. Really love that Mando Kent, reminds me of the one I never finished Love all the projects, and Mike S. love the color on that electric, turned out really nice. Congrats to everyone on a job well done.

I'm just finishing up my first Concert Uke for a friend. He picked out the colors. All I have left is to glue on the bridge, and do the final setup. I'll post finished pics later.

Tracy
Author:  Louis Freilicher [ Mon Jun 04, 2007 4:18 pm ]
Post subject: 
It's the guitar players banjo.... A Reproduction six string Vega Guit-Jo neck that is almost done.

Did the frets, made a nut blank and glued the dowel stick in tonight.









Posted in another thread but this one went away today.



Louis
Author:  Arnt Rian [ Mon Jun 04, 2007 6:34 pm ]
Post subject: 
Kent!

The mando looks great, please tell us more!
Author:  bob_connor [ Mon Jun 04, 2007 6:48 pm ]
Post subject: 


Mahogany/Lutz OM
Blackwood/Lutz SJ/12
Maple/Englemann OM
Ovangkol/Sitka OM
Padauk/Adi SJ/12 Left Handed

Cheers
Author:  Kim [ Mon Jun 04, 2007 9:28 pm ]
Post subject: 
Hey Bob, if you guys pulled ya finger out and stop slacking off round the beer fridge, ya's might just get someth'n done in that shed of yours. Awesome work mate, indeed tis prolific class from the Geelong Duo.

Cheers

Kim
Author:  MaxBishop [ Mon Jun 04, 2007 11:10 pm ]
Post subject: 
Here's a couple pics of my current project: a small flamenca based on 100 year old Ramirez plantilla.

Sp Cypress back and sides
German Spruce top
EIR Bindings
Cocobolo head plate

Max



Author:  KMartin [ Tue Jun 05, 2007 4:42 am ]
Post subject: 
Arnt, All,

I've been lurking here for a while, posting now and then. I participated in the swap meet a bit, but didn't have the funds to do it justice. Love the forum already.

The mandolin is my first, following 6 guitars, 2 flat-top octave mandolins, and 1-1/2 violins. The peghead profile follows the Gibson Top Tension model banjo peghead shape, and was requested by my customer, who owns a Top Tension. He was open to some deviations from the traditional F5 design, which was nice. I tried to let the rest of the design flow from the peghead.

A carved-top mando is definitely a graduate degree in wood working -- even after doing some violins from scratch, this is a killer. It's bound in curly koa, which was tricky to do. The neck joint was the other killer step.

I hope to make a fingerboard and then get it strung up in the white within a few weeks. I'm a part time hobbyist, trying to keep a day job for a while yet.

Arnt, I'm a big fan of your work -- what I've seen you post is beautiful, tasteful design.
Author:  Richard_N [ Wed Jun 06, 2007 7:43 pm ]
Post subject: 
Currently working on Number 2

OLF SJ - sitka top Black limba B/Sides

Page 1 of 3 All times are UTC - 5 hours
Powered by phpBB® Forum Software © phpBB Group
http://www.phpbb.com/