Official Luthiers Forum!
http://w-ww.luthiersforum.com/forum/

PRS is going to start with acoustics
http://w-ww.luthiersforum.com/forum/viewtopic.php?f=10102&t=12370
Page 1 of 1

Author:  mag29 [ Fri Jun 08, 2007 2:21 am ]
Post subject: 

Hi,

I got the information that PRS is going to start a high level acoustic line.

I am wondering if anyone has more informations (or pics!)?

Best,
Martin

Author:  JohnAbercrombie [ Fri Jun 08, 2007 2:37 am ]
Post subject: 

Should be interesting!
I've never heard an acoustic with 1/4" of plastic finish on it!
John

Author:  TonyKarol [ Fri Jun 08, 2007 3:31 am ]
Post subject: 

They hired Dana Bougeois as a consultant years ago to start up acoustics ... it never went anywhere.

Author:  crazymanmichael [ Fri Jun 08, 2007 4:16 am ]
Post subject: 

makes me think of fender and their acoustics, and i really don't want to do that.

the mind set is just so different.

Author:  mag29 [ Fri Jun 08, 2007 8:05 am ]
Post subject: 

[QUOTE=TonyKarol] They hired Dana Bougeois as a consultant years ago to start up acoustics ... it never went anywhere.[/QUOTE]


Tony,


I am in contact with a person who is right now working with PRS on this new line and they just finished the part they were working on together recently - I don?t think it?s the old story.


I don?t want to name the part because then it is obvious who informed me - up to now I didn?t realise that it might not made public yet: I cannot find anything about this trying google and I did NOT get this information as confidential. I don?t want to generate problems for the person (no OLF member) who talked to me, but it seems to me for real from what I learned.


Best regards from Germany,


Martin


 


 


 


 


 


 


Author:  mag29 [ Fri Jun 08, 2007 11:22 am ]
Post subject: 

[QUOTE=JohnAbercrombie]Should be interesting!
I've never heard an acoustic with 1/4" of plastic finish on it!
John[/QUOTE]


maybe there is no wood needed for the b+s and they install the top directly to the finish?


Author:  peterm [ Fri Jun 08, 2007 3:46 pm ]
Post subject: 

I would love to see that!

Page 1 of 1 All times are UTC - 5 hours
Powered by phpBB® Forum Software © phpBB Group
http://www.phpbb.com/