Official Luthiers Forum!
http://w-ww.luthiersforum.com/forum/

Radius blocks made Thanks Tommy C
http://w-ww.luthiersforum.com/forum/viewtopic.php?f=10102&t=12374		 Page 1 of 1
Author:  psl53 [ Fri Jun 08, 2007 5:20 am ]
Post subject: 

Just finished three corian radius blocks. It was almost as messy as making a radius dish and I'm sure just as deadly with out a mask ( yes I had mine on). I made three, an 18", 12" and a 8" and while I had the jig set up I made a caul from mdf. Thanks Tommy C for the post on the jig, it worked like a charm. Now on to the McClary jig.


Thanks All


Peter
Author:  Kim [ Fri Jun 08, 2007 5:48 am ]
Post subject: 
Peter,

They look great, do you have a link to the jig that you mentioned that TommyC posted? I had a look but could not see anything.

Cheers

Kim
Author:  SteveCourtright [ Fri Jun 08, 2007 5:54 am ]
Post subject: 
Those are darn purty...almost as nice as that neck you are clamping up. Kudos.
Author:  psl53 [ Fri Jun 08, 2007 5:58 am ]
Post subject: 

Kim,


Try this http://www.luthiersforum.com/forum/forum_posts.asp?TID=11745 &KW=radius+block#forumTop


and if not serch the archives for radius block. I think it's the first thread. The jig is real simple.


Thanks


Peter
Author:  Michael Dale Payne [ Fri Jun 08, 2007 6:21 am ]
Post subject: 
Author:  Kim [ Fri Jun 08, 2007 6:21 am ]
Post subject: 
Great, the link worked fine    

Thanks for that Peter and TommyC

Cheers

Kim
Page 1 of 1 All times are UTC - 5 hours
Powered by phpBB® Forum Software © phpBB Group
http://www.phpbb.com/