Official Luthiers Forum! http://w-ww.luthiersforum.com/forum/
De-glue Goo safe on water-based lacquer http://w-ww.luthiersforum.com/forum/viewtopic.php?f=10102&t=12508	Page 1 of 1

---

Author:	Ricardo [ Tue Jun 19, 2007 6:13 am ]
Post subject:
Does anyone know if this stuff is safe for removing titebond squeeze out on water-based lacquer such as Stewmac's Colortone?

---

Author:	CarltonM [ Wed Jun 20, 2007 1:41 pm ]
Post subject:
Looks like nobody knows for sure. My uneducated guess would be that it's okay to use, once the lacquer has cured. It's only a guess, so I'd suggest contacting Stew-Mac about it. People here have gotten quick and helpful responses by phone and e-mail.

---

Author:	Ricardo [ Wed Jun 20, 2007 2:16 pm ]
Post subject:
Carlton, I am amazed that no one really knew the answer here or on the other forum.  So I finally tested it.  No problems.  So for those that need to remove squeeze out from a bridge - use De-glue goo with confidence that it won't hurt your water-based lacquer finish.  My finish was just 10 days old. Thanks Rich

---

Author:	CarltonM [ Thu Jun 21, 2007 5:17 am ]
Post subject:
Thanks for the follow-up Rich. Good information to have.

---

Page 1 of 1	All times are UTC - 5 hours
Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/