Official Luthiers Forum!
http://w-ww.luthiersforum.com/forum/

k sled
http://w-ww.luthiersforum.com/forum/viewtopic.php?f=10102&t=12709		 Page 1 of 1
Author:  jonhfry [ Wed Jul 04, 2007 10:31 am ]
Post subject: 

Somebody posted a link to the k-sled a little while back. Thanks for doing so (think it was larkim), anyway..... I am somewhat dense at times and may be missing something real small or whatever, but I am just not picturing this thing in motion.


What stops the blade from going all the way throught he kerf?


Thanks in advance.


Jon

Author:  KenH [ Wed Jul 04, 2007 1:51 pm ]
Post subject: 

There is a stop that you have to set in order to keep it from cutting all the way through.


I built one that didnt exactly follow the plans for the ksled, but tore it apart and built one closer to the plans from this site. The only thing I had to change was to make a pin that would keep the ribbon fromn backing up after it had the kerf cut in it. Otherwise, it works like a dream and I now make all of my kerfed linings.


HERE IS THE LINK
Author:  Kim [ Wed Jul 04, 2007 2:37 pm ]
Post subject: 
Hi I am just back online with a new ISP after a week in dial-up doldrums so the link will not work. I will be hosting the tute on the new ISP when I find time and will update shortly. Be patient with me, it will happen

Cheers

Kim
Author:  jonhfry [ Wed Jul 04, 2007 11:51 pm ]
Post subject: 

I can't get your link to work, Cry
Author:  WaddyThomson [ Thu Jul 05, 2007 12:41 am ]
Post subject: 
John, it is Kim's link, so it won't work till he updates it on his new ISP.  Be Brave! 
Page 1 of 1 All times are UTC - 5 hours
Powered by phpBB® Forum Software © phpBB Group
http://www.phpbb.com/