***** Guitar Project Jigs, Tools & Techniques Online Resources Archives OLF Video Page Library of plans MP3 Library Inlay Class
Offical Luthiers Forum





And our community proudly sponsored by:

RC Tonewoods | Stewart MacDonald | LuthiersForum
TasmanianTonewoods | OLF | OLF MERCH
Luthier Suppliers | Pacific Coast Woods | ELEVATE
OLF X | Tasmanian Acoustic Tonewood | Luthiers Forum Store!
Luthiers Forum | OLF Facebook | AVAIL SPACE
OLF | Alaska Specialty Woods | A.Hix Tonewood
Duke of Pearl | Birkonium CNC | Space




Official Luthiers Forum!

Owned and operated by Lance Kragenbrink
It is currently Sat Nov 30, 2024 9:34 pm


Board index » Forum Archive

All times are UTC - 5 hours





Post new topic Reply to topic  Page 1 of 1
  [ 4 posts ] 
  Print view Previous topic | Next topic 
Author Message
L. Presnall
 Post subject:
PostPosted: Fri Jul 13, 2007 12:17 pm 
Offline
Contributing Member
Contributing Member

Joined: Wed Feb 02, 2005 3:14 am
Posts: 2590
Location: United States
Okay 'lectric builders...how to remove the tailpiece studs from a solid body? Any tricks? I'm thinking a hollowed out dowel or something over the stud and the bolt thru a big flat washer and let the threads pull it out?

_________________
http://www.presnallguitars.com
Top
 Profile  
 
Bob Garrish
 Post subject:
PostPosted: Fri Jul 13, 2007 12:35 pm 
Offline
Brazilian Rosewood
Brazilian Rosewood
User avatar

Joined: Tue May 02, 2006 9:02 am
Posts: 2351
Location: Canada
First name: Bob
Last Name: Garrish
City: Toronto
State: Ontario
Country: Canada
Status: Professional
Long bolt which fits the stud, with a head, and open a heavy-ended adjustable wrench enough to get over the shaft of the bolt but not the head and then tap it out that way. Nothing bearing against the body but your hand.

That's how I pull the steel pins out of some of my fixtures when they're really stuck.

_________________
Bob Garrish
Former Canonized Purveyor of Fine CNC Luthier Services
Top
 Profile  
 
Brock Poling
 Post subject:
PostPosted: Fri Jul 13, 2007 3:21 pm 
Offline
Old Growth Brazilian Rosewood
Old Growth Brazilian Rosewood
User avatar

Joined: Mon Dec 27, 2004 1:20 pm
Posts: 5915
Location: United States
Funny enough, I have been thinking about that issue.

I was thinking about making up something like this (but to pull the hardware obviously):



and to protect the finish I was thinking about gluing cork or felt on a scraper and drilling a hole through it. So the tool would push against the metal.


_________________
Brock Poling
Columbus, Ohio
http://www.polingguitars.com
Top
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  Page 1 of 1
  [ 4 posts ] 

Board index » Forum Archive

All times are UTC - 5 hours


Who is online

Users browsing this forum: No registered users and 42 guests

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Jump to:  
Powered by phpBB® Forum Software © phpBB Group
phpBB customization services by 2by2host.com