Excellent!
| Official Luthiers Forum! http://w-ww.luthiersforum.com/forum/ |
|
| News From John Watkins & CNCparts.com http://w-ww.luthiersforum.com/forum/viewtopic.php?f=10102&t=12868 |
Page 1 of 1 |
| Author: | Michael Dale Payne [ Wed Jul 18, 2007 3:52 am ] |
| Post subject: | |
I had not talked to John in a while so it was good to hear from him. I just thought I would pass along to those that did not know. John is shutdown for a while to build up inventory. He expects to be back open near the first of November with a vast inventory of bridges, 6 and 12 string paddle head and slotted head laminated necks as well as many other parts. I do not know for sure but gathered from our brief conversation he is trying to get away from so many single order semi-custom necks and instead have a ready supply of most wood and lamination combos on hand when he reopens. Just thought I would pass this info along |
|
| Author: | LanceK [ Wed Jul 18, 2007 4:03 am ] |
| Post subject: | |
Excellent!
|
|
| Author: | Terry Stowell [ Wed Jul 18, 2007 4:22 am ] |
| Post subject: | |
Great news! I can see his business really taking off.
|
|
| Author: | JJ Donohue [ Wed Jul 18, 2007 4:41 am ] |
| Post subject: | |
Thanks for the info, Michael! He's one of the best suppliers we have. I sure hope he's keeping up his golf skills! |
|
| Author: | Dave-SKG [ Wed Jul 18, 2007 4:48 am ] |
| Post subject: | |
Does anyone know where to find the small outer diameter brass inserts (similar to what John uses)? I believe they are 1/4-20 inner and .365" outer. |
|
| Author: | Michael Dale Payne [ Wed Jul 18, 2007 6:11 am ] |
| Post subject: | |
I believe they are the same barrel as LMI's |
|
| Author: | Michael Dale Payne [ Wed Jul 18, 2007 6:12 am ] |
| Post subject: | |
[QUOTE=MichaelP] I believe they are the same barrel as LMI's [/QUOTE] I ment threaded insert not barrel |
|
| Author: | Ricardo [ Wed Jul 18, 2007 6:57 am ] |
| Post subject: | |
[QUOTE=Dave-SKG]Does anyone know where to find the small outer diameter brass inserts (similar to what John uses)? I believe they are 1/4-20 inner and .365" outer.[/QUOTE] Try http://www.leevalley.com/hardware/page.aspx?c=2&p=44203& amp;cat=3,41306,41311  |
|
| Page 1 of 1 | All times are UTC - 5 hours |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|